Tools

Whether you are a commercial contractor, an industrial manufacturer, or just a do-it-yourselfer, RH Fasteners can meet your needs with an incredible inventory of assembly hardware. And it's not just nuts-n-bolts, we also carry everything from shop supplies to safety equipment!

Here's a listing of the variety of products we carry in this category. But this is just the beginning - be sure to visit our vendor catalog pages to see images, sizes, and part numbers.

CONCRETE SCREW INSTALL TOOL
  • 3/16 CONCRETE SCREW INSTALLATION TOOL
  • 1/4 CONCRETE SCREW INSTALLATION TOOL
    • C CLAMP
  • 2″ “C” CLAMP MALLEABLE
  • 3″ “C” CLAMP MALLEABLE
  • 4″ “C” CLAMP MALLEABLE
  • 8″ “C” CLAMP MALLEABLE
  • 10″ HEAVY SERVICE “C” CLAMP
  • REPLACEMENT PAD
  • SCREW FOR REPLACEMENT PAD
  • 12″ LIGHT DUTY “C” CLAMP 1200 LBS.
  • 12″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 12″ ECONOMY SERIES L-CLAMP 2600 LBS.
  • 20″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 40″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 60″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 8″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 12″ HEAVY DUTY “C” CLAMP 4800 LBS.
  • 20″ HEAVY DUTY “C” CLAMP 4800 LBS.
  • 8″ ECONOMY SERIES L-CLAMP 1500 LBS.
  • 10″ ECONOMY SERIES L-CLAMP 2600 lb.
  • 12″ ECONOMY L-CLAMP 2600 LBS. CLAMP
  • 24″ ECONOMY SERIES L-CLAMP 2600 lb.
  • 5-5/16″ MCx2-9/16″ TD DOUBLE HEX BOLT
  • 12″ CLAW CLAMP 1775 LBS.
  • REPLACEMENT SHOE FOR CLAW CLAMP
  • 12″ RATCHET ACTION LEVER CLAMP 1110 LBS.
  • 8″ RATCHET ACTION LEVER CLAMP 770 LBS.
  • 20″ REGULAR DUTY “C” CLAMP 2400 LBS.
  • 8″ SUPER GRIP “C” CLAMP 660 LBS.
  • 2 1/2″ MUTI-GRIP “C” CLAMP 330 LBS.
  • 4″ SUPER GRIP PIPE CLAMP
  • 4″ SUPER GRIP WELDERS’ FORK “C” CLAMP
  • 4 1/2″ DEEP REACH SUPER GRIP “C” CLAMP
  • 12″ SUPER QUICK “C” CLAMP 2660 LBS.
  • 4″ SUPER QUICK “C” CLAMP 1330 LBS
  • 8″ SUPER QUICK “C” CLAMP 2660 LBS.
  • 12″ SUPER TUFF BESSEY “C” CLAMP 4880 LBS
  • 16″ HEAVY DUTY WOODWORKING BAR CLAMP
  • 12″ MEDIUM DUTY WOODWORKING BAR CLAMP
  • VAD PAD FOR BESSEY CLAMP
  • 9-1/2″ WELDERS ANGLE CLAMP
  • 7″ WELDERS ANGLE CLAMP
    • CABLE CRIMPER
  • CABLE CRIMPER 6GA TO 4/0GA
    • CHUCK
  • 3/8 CHUCK 3/8-24 THREAD
  • 3/8 CHUCK #2 JACOBS TAPER 0″ TO 3/8″
  • 1/2 CHUCK 3/8-24 THREAD
  • 1/2 CHUCK 3/8-24 THREAD (JACOBS)
  • 1/2 CHUCK 1/2-20 THREAD
  • 1/2 CHUCK 1/2-20 THREAD (JACOBS)
  • 5/8 CHUCK #3 MORSE TAPER 1/8″ TO 5/8″
  • 5/8 CHUCK #3 MORSE TAPER 1/8″ TO 5/8″
  • 3/4 CHUCK #3 MORSE TAPER 1/8″ TO 3/4″
  • 3/4 CHUCK FOR MIL 1854-1 SUPER DRILL
  • 3/4 CHUCK #3 MORSE TAPER 1/8″ TO 5/8″
  • 1/2 CHUCK 1/16 TO 1/2 CAP// TAPER S9 KEY
  • 3MT TO 2JT ARBOR
  • 3MT TO 3JT ARBOR
  • 1/16 “SNAPPY” DRILL ADAPTER
  • 13/64 “SNAPPY” DRILL ADAPTER
  • DELTA CHUCK FOR DELTA 17-900 DRILL PRESS
  • SNAPPY QUICK CHUCK FOR 3/8 CHUCK
    • DRILL CHUCK
  • 3/8″ DRILL CHUCK W/ 3/8-24 THREAD
    • CHUCK KEY
  • 1/4 CHUCK KEY 5/32 PILOT HOLE FITS
  • 1/4 & 3/8 CHUCK KEY 1/4 PILOT HOLE FITS
  • 3/8 CHUCK KEY 15/64 PILOT HOLE FITS
  • 3/8 & 1/2 CHUCK KEY 9/32 PILOT HOLE FITS
  • 3/8 CHUCK KEY 1/4 PILOT HOLE FITS
  • 3/8 CHUCK KEY 7/32 PILOT HOLE FITS
  • 1/2 CHUCK KEY 1/4 PILOT HOLE FITS K-32
  • 1/2 CHUCK KEY 5/16 PILOT HOLE FITS
  • 1/4 CHUCK KEY 13/64 PILOT HOLE FITS
  • CHUCK KEY FOR 1854-1 MILWAKEE DRILL
  • 3/4″ CHUCK KEY 3/8″ PILOT HOLE
    • DRILL ATTACHMENT
  • RIGHT ANGLE DRIVE DRILL ATTACHMENT FOR
  • 3/16×5/16×3/4 “P” DRILL JIG BUSHING
    • FILE
  • 8″ HALF ROUND BASTARD FILE
  • 10″ FLAT MILL BASTARD FILE
  • 6″ HALF ROUND BASTARD FILE
  • 10″ HALF ROUND BASTARD FILE
  • 12″ HALF ROUND BASTARD FILE
  • 10″ HALF ROUND WOOD RASP FILE
  • 6″ MILL BASTARD FILE
  • 10″ MILL BASTARD FILE
  • 12″ MILL BASTARD FILE
  • 6″ ROUND BASTARD FILE
  • 8″ ROUND BASTARD FILE
  • 10″ ROUND BASTARD FILE
  • 12″ ROUND BASTARD FILE
  • THREAD RESTORING FILE METRIC BOLT
  • THREAD RESTORING FILE REGULAR BOLT
    • HAMMER
  • 16″ WOOD HAMMER HANDLE (24-32 oz)
  • 18″ WOOD HAMMER HANDLE (40-48 oz)
  • 36″ FIBERGLASS SLEDGE HAMMER HANDLE
  • 8 LB SLEDGE HAMMER W/HANDLE
  • 10 LB SLEDGE HAMMER W/HANDLE
  • 12 OZ BALL PIEN HAMMER
  • 16 OZ BALL PIEN HAMMER
  • 16 OZ SK SOFT FACE HAMMER
  • 22 OZ STRAIGHT CLAW HAMMER 16″ HANDLE
  • 32 OZ. RUBBER MALLET
  • 6 LB. SLEDGE HAMMER W/HANDLE
  • 3 LB BLACKSMITH DOUBLE FACE
  • HANDLE WOOD FOR 3 LB BLACKSMITH HAMMER
  • 4 LB BLACKSMITH DOUBLE FACE
  • 16oz. DEAD BLOW HAMMER SOFT
  • 22 OZx2″ DEAD BLOW HAMMER 1 PIECE
    • BOLT EXTRACTOR
  • 1/4″-M6 BOLT EXTRACTOR
  • 5/16-M8; 3/8-M10; AND 1/2-M12 EXTRACTOR
  • 5/16″- M8 BOLT EXTRACTOR
  • 3/8″- M10 BOLT EXTRACTOR
  • 1/4-M6; 5/16-M8; 3/8-M10; AND 1/2-M12
  • 1/2″- M12 BOLT EXTRACTOR
    • PIPE WRENCH
  • 3/8″ TWO-WAY INTERNAL PIPE WRENCH
  • 1/2″ TWO-WAY INTERNAL PIPE WRENCH
    • KEENSERT TOOL
  • #10 THIN WALL INSTALLATION TOOL
  • 1/4 HEAVY DUTY INSTALLATION TOOL
  • 1/4 THIN WALL INSTALLATION TOOL
  • 5/16 HEAVY DUTY INSTALLATION TOOL
  • 5/16 THIN WALL INSTALLATION TOOL
  • 3/8 HEAVY DUTY INSTALLATION TOOL
  • 3/8 THIN WALL INSTALLATION TOOL
  • 7/16 HEAVY DUTY INSTALLATION TOOL
  • 1/2 HEAVY DUTY INSTALLATION TOOL
  • 1/2 THIN WALL INSTALLATION TOOL
  • 9/16 HEAVY DUTY INSTALLATION TOOL
  • 5/8 HEAVY DUTY INSTALLATION TOOL
  • 3/4 HEAVY DUTY INSTALLATION TOOL
  • 7/8 HEAVY DUTY INSTALLATION TOOL
  • 1″ HEAVY DUTY INSTALLATION TOOL
  • M6 HEAVY DUTY INSTALLATION TOOL
  • M8 HEAVY DUTY INSTALLATION TOOL
  • M10 HEAVY DUTY INSTALLATION TOOL
  • M12 HEAVY DUTY INSTALLATION TOOL
  • M14 HEAVY DUTY INSTALLATION TOOL
  • M16 HEAVY DUTY INSTALLATION TOOL
    • PIPE CLAMP
  • 3/4″ MORTON PIPE CLAMP
    • PUNCH
  • 3/32 DRIVE PUNCH 4″ LONG
  • 1/8 DRIVE PUNCH 8″ LONG
  • 1/4 DRIVE PUNCH 8″ LONG
  • 5/16 TRANSFER PUNCH
  • 3/8×5 CENTER PUNCH
  • 3/8x15x1 STOCK DRIFT PUNCH LONG TAPER
  • 3/8 TRANSFER PUNCH
  • 7/16 TRANSFER PUNCH
  • 1/2 DRIVE PUNCH 8″ LONG
  • 1/2 PRICK PUNCH 6″ LONG
  • 1/2 TRANSFER PUNCH
  • 5/8×5″ AUTOMATIC CENTER PUNCH #818
  • 5/8 TRANSFER PUNCH
  • 3/4 TRANSFER PUNCH
  • 0 THRU 9 NUMBER PUNCH SET 3/16 HIGH 9 PC
  • 3/32 X 4″ OAL DRIVE PIN PUNCH
  • #5 METAL PUNCH KIT , 7 ROUND PUNCHES
    • RIGID TOOL
  • 1/2″ PIPE DIE ONLY RIGID 12-R
  • 1-1/4″ PIPE DIE ONLY RIGID 12-R
  • RIGID 12-R RACHET HANDLE
  • RIGID 1 1/2″ DIE HEAD COMPLETE
  • 1 1/2 DIE SET FOR MODEL 36-345 RIGID
  • RIGID 44540 BRUSHES FOR 300 THREADER
  • JAW SET INSERT FOR 300 THREADER
  • 1/4-3/8″ UNIVERSAL DIES
  • 1″ TO 2″ NPT CARBON DIES FOR MODEL 300
  • 1/2-3/4 UNIVERSAL NPT PIPE DIE
  • 3/4-14 NPT HIGH SPEED STRAIGHT PIPE DIE
  • 7/16-14 ALLOY BOLT DIE UNIV. DIE HEAD
  • 1-8 ALLOY DIES FOR RIGID MODEL 811 HEAD
  • 1-1/4-7 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 1-1/2-6 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 5/16-24 ALLOY BOLT DIE UNIV. DIE HEAD
  • 5/8-18 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 3/8-16 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 1/2-13 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 5/8-11 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 3/4-10 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 1-1/2-6 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 1-3/4-5 BOLT DIE FOR UNIVERSAL DIE HEAD
  • 1-3/4-8 BOLT DIE FOR 500 SERIES DIE HEAD
  • 1-7/8-8 BOLT DIE FOR 500 SERIES DIE HEAD
  • MODEL 154 PLASTIC PVC CUTTING WHEEL
  • RIGID 532 DIE HEAD
  • QUICK OPEN DIE HEAD PT#97065
  • 1/2-8″ TOP SCREW BENCH CHAIN VISE
  • REPLACEMENT CUTTER WHEEL FOR RIGID PIPE
    • RIV NUT TOOL
  • AE801-832 PNUEMATIC ATLAS RIV-NUT TOOL
  • THREADED INSERT TOOL CELUS CN/12
  • 6-32 MANDREL FOR CELUS CN/12 NUTSETTER
  • 8-32 MANDREL FOR CELUS CN/12 NUTSETTER
  • CN/28 HEAVY DUTY HAND TOOL #6 TO 3/8″
  • M5 WRENCH-DRIVE RIVET NUT INSTALLATION
    • RULER
  • 6′ FOLDING RED END INSIDE READ PLUMBERS
  • 6″ RULER 16THS AND 32NDS W/POCKET HOLDER
  • 18″ RULER GRADUATED AND BEVELED ONE EDGE
  • 48″ RULER GRADUATED AND BEVELED ONE EDGE
  • 12″ CENTER FINDING RULER CORK BACKED
  • 6″ RULER 8TH,16THS,QUICK READING 32NDS
  • 12″ COMBINATION RULER,PROTRACTOR,SQUARE
  • 6″ RULER 16THS AND QUICK READING 32NDS
  • 6″ STEEL RULER 0 TO 150MM MEASURE
  • 300MM RULER 10ths-50ths 1mm-1/2mm
  • 6″ RULER METRIC BOTH SIDES
  • 12″ RULER METRIC ONE SIDE USS OTHER SIDE
  • 6″ RULER METRIC ONE SIDE USS OTHER SIDE
  • 6″ RULER METRIC ONE SIDE USS OTHER SIDE
  • 6″ RULER METRIC ONE SIDE USS OTHER SIDE
    • SENEX ADAPTER
  • SENEX 1/2″ SWIVEL IMPACT ADAPTER
    • SHOVEL
  • #02 LONG HANDLE SQUARE POINT SHOVEL
  • #10 ALUMINUM SCOOP SHOVEL
  • #12 SCOOP SHOVEL
  • #12 ALUMINUM SCOOP SHOVEL
  • #14 ALUMINUM SCOOP SHOVEL
  • ROUND POINT STRAIGHT HANDLE SHOVEL
  • LONG HANDLE SPADE SHOVEL SOLID GREY
  • D HANDLE SHARP SHOOTER SHOVEL
    • S K TOOLS
  • S-K 1/2″ SWIVAL ADAPTER CHROME
    • TAPE MEASURE
  • 1/4X10’/3 METER ENGLISH/METRIC TAPE
  • 3/8x30MM RETRACTABLE TAPE MEASURE HI-VIS
  • 1/2X8′ RETRACTABLE TAPE MEASURE
  • 1/2X12′ RETRACTABLE TAPE MEASURE
  • 1/2×200′ USTAPE NYLON CLAD STEEL TAPE
  • 3/4X12′ RETRACTABLE TAPE MEASURE
  • 3/4×16′ RET. TAPE MEASURE 1/16 & MM
  • 3/4X26′ ENGLISH/METRIC TAPE MEASURE RETR
  • 3/4X25′ RETRACTABLE TAPE MEASURE
  • 3/4×100′ RETRACTABLE TAPE MEASURE FIBER-
  • 1″x25′ “JORGENSEN” TAPE MEASURE GREEN
  • 1″x25′ “JORGENSEN” TAPE MEASURE ORANGE
  • 1″x25′ “JORGENSEN” TAPE MEASURE YELLOW
  • 1″X25′ RETRACTABLE TAPE MEASURE
  • 1″x25′ “JORGENSEN” TAPE MEASURE YELLOW
  • 3/8×100′ RETRACTABLE TAPE MEASURE
  • 1″X25′ RETRACTABLE TAPE MEASURE
    • TOOLS
  • #70A 1/4 HANDLE X 2 3/8 POINT LENGTH
  • TELESCOPING BLADE
  • PNEUMATIC SCREWDRIVER 15-45 INCH POUNDS
  • PNEUMATIC SCREWDRIVER 1-9 INCH POUNDS
  • .100X 1 7/8 X 1/4 POCKET SCREWDRIVER
  • .150X 2 15/16 X 5/16 POCKET SCREWDRIVER
  • 1/16 TO 1 1/16 INCH INSIDE DIAMETERS
  • .010TO.150 ONE SIDE 0.3 TO 4MM REV. SIDE
  • 1/4 X 5/16 OPEN END WRENCH
  • 3/8″ COMBINATION WRENCH ALLOY 6 PT.
  • 3/8″ 13 pc. SHALLOW SOCKET SET 3/8-7/8″
  • 3/8″ 13 pc. SHALLOW SOCKET SET 7mm-19mm
  • 7/16″ COMBINATION WRENCH ALLOY 12 PT.
  • 1/2 X 9/16 BOX END WRENCH
  • 1/2″ COMBINATION WRENCH ALLOY
  • 1/2″ 21 pc. DEEP SOCKET SET 10mm-32mm
  • 1/2″ 19 pc. SHALLOW SOCKET SET 10mm-28mm
  • 1/2″ x 10″ IMPACT EXTENTION
  • 1/2″ 25-250 FT LBS TORQUE WRENCH
  • 9/16″ COMBINATION WRENCH ALLOY 12 PT.
  • 3/4″ COMBINATION WRENCH ALLOY 12 PT.
  • 1-1/16″ COMBINATION WRENCH
  • 1 1/8″ COMBINATION WRENCH
  • 1-3/8″ COMBINATION WRENCH
  • 1-7/16″ COMBINATION WRENCH
  • 1 1/2″ COMBINATION WRENCH
  • 1-1/2″ WRIGHT SERVICE WRENCH
  • 2″x8″x1″ OIL STONE 2 SIDED
  • 2″ COMBINATION WRENCH
  • 3/8″ TO 3/4″ COMBINATION WRENCH SET 7 PC
  • 6″ ADJUSTABLE WRENCH NICKLE PLATE
  • 6″ DIAL CALIPERS
  • 6″ ELECTRONIC DIGITAL CALIPER .001 INCH
  • 3/8 ARMSTRONG RACHET PLASTIC HANDLE
  • 8″ ELECTRONIC DIGITAL CALIPER .0005″
  • 12″ ADJUSTABLE WRENCH BLACK
  • 14″ BOLT CUTTER FULLER
  • 10″ ADJUSTABLE WRENCH NICKLE PLATE
  • 16″ GROOVE JOINT CHANNEL LOCK PLIER
  • 12″ ADJUSTABLE WRENCH NICKLE PLATE
  • 7 pc. 3/8 DRIVE ALLEN SET
  • 15″ ADJUSTABLE WRENCH NICKLE PLATE
  • #17 RING BUSHING FOR MAKITA CUT OFF SAW
  • BARREL RETAINER FOR RAM SET SA 270
  • 36″ BOLT CUTTER H.K. PORTER
  • REPLACEMENT HEAD FOR 36″ BOLT CUTTER
  • 36″ RIGID ALUMINUM PIPE WRENCH
  • RETAINING RING PLIER KIT: 1 INTERNAL,
  • 48″ RIGID ALUMINUM PIPE WRENCH
  • 3/8″ CRDLS DRILL 12V W/CASE & XTRA BAT
  • 7″ DIAGONAL CUTTER
  • COLD CHISEL FOR CLEECO NEEDLER/SCALER
  • INCH SOC SCREW SELECTION GAUGE
  • METRIC SOC SCREW SELECTION GAUGE
  • 1/2 16 pc. 12 PNT. SOCKET SET 7/16-1-1/4
  • 3/8 THRU 1-1/4 COMBINATION WRENCH SET
  • 48″ ADJUSTABLE T-SQUARE
  • 1/2″x16″ BREAKOVER BAR
  • 1/2″x18″ BREAKOVER BAR
  • CLEECO B1-C-LT NEEDLE/SCALER HEAVY DUTY
  • 36″ SLIDING BAR CLAMP
  • 6″ BUBBLE LEVEL MACHINISTS
  • 6″ BUBBLE LEVEL TORPEDO MAGNETIC
  • 12″ BUBBLE LEVEL MACHINISTS
  • 24″ BUBBLE LEVEL ALUMINUM I-BEAM TYPE
  • 24″ BUBBLE LEVEL ALUMINUM WITH MAGNET
  • 36″ BUBBLE LEVEL ALUMINUM I-BEAM TYPE
  • 48″ BUBBLE LEVEL ALUMINUM I-BEAM TYPE
  • 48″ BUBBLE LEVEL ALUMINUM I-BEAM TYPE
  • 48″ BUBBLE LEVEL CASE
  • 48″ BUBBLE LEVEL ALUMINUM WITH MAGNET
  • 72″ BUBBLE LEVEL ALUMINUM I-BEAM TYPE
  • 72″ BUBBLE LEVEL CASE
  • 3 WAY POST LEVEL
  • 13″Wx7″Dx6″H REDLINE TOOL BOX w/TRAY
  • 17″Wx8″Dx9″H AKRO-BOX TOOL BOX w/TRAY
  • 19″ HANDLED TOOLBOX W/ METAL TRAY
  • BANDING TOOL FOR POLY STRAP
  • #C183 PROTRACTOR & BLADE
  • 2 TON COMEALONG W/ 6 FT. CABLE
  • HOLDING DOG FOR P15D-3H INGERSOL-RAND
  • CONSTRUCTION MASTER IV CALCULATOR
  • 2 TON INGERSAL-RAND COMEALONG 6FT WIRE
  • 7-1/4″ AIRCRAFT CABLE CUTTER
  • 100′ CHALK LINE SELF CHALKING
  • 16″ GROOVE JOINT CHANNEL LOCK #460
  • 12″ DEWALT COMPOUND MITER SAW
  • SUN 5807 CREEPER SEAT ON WHEELS
  • 14 MILWAUKEE ELECTRIC CHOP SAW
  • 15 MILWAUKEE ELECTRIC CHOP SAW
  • CONVERTIBLE CREEPER SEAT
  • 15″ CHAIN WRENCH
  • 1/2″ ELECTRIC DRILL V-S REVERSIBLE H.D.
  • 3/8″ CORDLESS DRILL V-S REVERSIBLE
  • 3/8″ MILW. ELEC. DRILL V-S/REV. #0231-6
  • 1/2″ IMPACT DRILL DEWALT DW291
  • 1/2″ MILW. ELEC. DRILL V-S/REV. #0234-6
  • D45 RAMSET GUN .25 CALIBER 10 SHOT
  • 1/4 PNEUMATIC ANGLE DIE GRINDER HD
  • 3/4 HP-16 1/2″ CAP. DELTA DRILL PRESS
  • CENTER PULLEY FOR DELTA 17-900 DRILL
  • DELTA DRILL PRESS RACK DELTA #1312008
  • DW997/DW936/DW938/DW919 DRILL/TRIM SAW
  • DRYWALL SCREWDRIVER MILW.#6758-6
  • 3/16 E CLIP APPLICATOR
  • RATCHET TOOL FOR 22/10 GAUGE TERMINALS
  • RATCHET TOOL FOR 22/10 GAUGE TERMINALS
  • 6-IN-ONE TOOL KLEIN #1000 MULTI-PURPOSE
  • ECONOMY CRIMPING TOOL 22-14 AWG
  • T & B CRIMPING TOOL 22-10 AWG WT112M
  • DELUX WIRE STRIPPER AND CRIMING TOOL
  • RATCHET TOOL FOR 22/10 GAUGE TERMINALS
  • STRAIGHT EXTERNAL SNAP RING PLIERS 1/4″
  • 45 DEGREE EXTERNAL SNAP RING PLIERS
  • 5″ SOC EXTENTION 3/8″ DRIVE
  • 10″ SOC EXTENTION 1/2″ DRIVE
  • 5″ SOC EXTENTION 1/2″ DRIVE
  • FLAT BAR
  • 10 pc. FLEX COMBO. WRENCH SET 10mm-19mm
  • 1 1/4 REVESIBLE MILWAUKEE FRAME DRILL
  • MAGNETIC MILWAUKEE FRAME DRILL STAND
  • HANDLE FOR 12-14″ HALF ROUND FILE
  • 5 pc. FOLDING HEX KEY SET 3/16-3/8
  • 9 pc. FOLDING HEX KEY SET .050-3/16
  • 7 pc. FOLDING METRIC HEX KEY SET 1.5-6MM
  • 5/16″ X 6″ FLAT HEAD SCREW DRIVER
  • 6-1/4″ STRAIGHT FORCEPS SS
  • CHERRY 780 RIVET AIR TOOL
  • 4″ ELECTRIC RIGHT ANGLE DISC GRINDER
  • 4-1/2 ELECTRIC RIGHT ANGLE DISC GRINDER
  • 4-1/2 ELECTRIC RIGHT ANGLE DISC GRINDER
  • 7″ ELECTRIC RIGHT ANGLE DISC GRINDER
  • 9″ ELECTRIC RIGHT ANGLE DISC GRINDER
  • 1/2″ 9 pc. METRIC HEX BIT SOC 3mm-19mm
  • 1/2″ PORTER CABLE ELECTRIC HAMMER DRILL
  • FLAMELESS HEAT GUN ELECTRIC
  • 6 PC. HOLLOW PUNCH KIT 1/8 THROUGH 3/8
  • 27 PC. HOLLOW PUNCH KIT 1/8″ THROUGH 2″
  • HOG RING TOOL
  • HEAT SHRINK ATTACHMENT
  • 1/2″ IMPACT WRENCH WITH REVERSE
  • 1/2″ IMPACT WRENCH REVERSEABLE W/CASE
  • 3/4″ IMPACT WRENCH WITH REVERSE
  • 3/4″ ELECTRIC IMPACT WRENCH W/REVERSE
  • 3/4″ IMPACT WRENCH REVERSEABLE W/CASE
  • 32.7CF JOB BOX W/SLOPE LID
  • DUWALT COMMERICAL JIG SAW
  • DUWALT COMMERICAL JIG SAW
  • 1-1/2 KNOCK OUT CUTTER
  • KNOCK OUT DIE
  • KNOCK OUT PUNCH
  • STUD FOR 1/2 ” KNOCK OUT
  • STUD FOR 3/8 KNOCK OUT
  • GREENLEE KWICK STRIPPER POCKET CABLE
  • 3/4-13/16-7/8-15/16″ 4 WAY LUG WRENCH
  • MAKITA HIGH CAPACITY CHARGER
  • MILWAUKEE ELECTRIC HAMMER DRILL
  • 18″ SIX-FUNCTION MECHANICS LEVEL W/PLUMB
  • 24″ SIX-FUNCTION MECHANICS LEVEL W/PLUMB
  • 1-1/2 MILWAUKEE SPLINE DRIVE ROTARY
  • 24″ X 36″ MACHINIST STAND
  • 1/4″ NUT DRIVER
  • 5/16 NUT DRIVER
  • 3/8″ VACO NUT DRIVER
  • 3/16″ TO 1/2″ NUT DRIVER SET
  • 9 PC. NUT DRIVER SET 3/16 THRU 1/2
  • M5-M10 NUT DRIVER SET
  • MILWAKEE PORTA BAND SAW W/CASE
  • 3/4 PIPE CLAMP HARDWARE
  • 3″ PUTTY CHISEL w/PLASTIC HANDLE
  • 3/8 PNEUMATIC DRILL 2400 RPM FREE SPEED
  • 1/2 PNEUMATIC DRILL 800 RPM.
  • 1/2 PNEUMATIC DRILL 95O RPM.
  • #2 PHILLIPS HEAD SCREW DRIVER
  • 1-1/4″ PUTTY KNIFE FLEXABLE BLADE
  • 1-1/4″ PUTTY KNIFE STIFF BLADE
  • 9″ LINEMAN PLIERS W/WIRE CUTTER
  • EXTERNAL SNAP RING PLIERS 6-1/2″
  • 9-1/4 KLEIN HIGH LEVERAGE LINEMAN PLIERS
  • PUNCHMASTER 2 PUNCH DOWN TOOL FOR PHONE
  • PUNCHMASTER 2 REPLACEABLE BLADE NO.110
  • PUNCHMASTER 2 REPLACEABLE BLADE NO.66
  • 4 TON PORTA-POWER HYDROLIC JACK KIT
  • 3/8 DRIVE RATCHET
  • 1/2 DRIVE RATCHET
  • 1/2″ DRIVE WILDE WRATCHET
  • RIVET DRILL
  • VARIABLE SPEED RYOBI JIGSAW
  • M70 RAMSET GUN .22 CALIBER SINGLE SHOT
  • 225-RN RIV NUT TOOL FOR INSTALLING
  • EXTERNAL SNAP RING PLIERS 5-5/8″
  • RAZOR SCRAPER SINGLE EDGE BLADE
  • SOUIX 7″ AIR GRINDER #1287 6000 RPM
  • 3″ SPRING CLAMP
  • 12″ COMBINATION SQUARE W/LEVEL & SCRIBER
  • 8 1/2″ WISS SCISSOR BENT OFFSET HANDLE
  • 16″x24″ CARPENTERS SQUARE ALUM. ETCHED
  • DRIVER W/#2 PHILLIPS SECURITY BIT
  • DRIVER W/#6 SPANNER BIT FOR # 6 SCREW
  • DRIVER W/#8 SPANNER BIT
  • SCREW DRIVER #2 SQUARE DRIVE 4″ BLADE
  • #1 PHILLIPS SCREW DRIVER
  • ONE WAY REMOVAL TOOL FOR 8-10 SCREWS
  • 3/16×3″ BLADE SCREW DRIVER W/CUSHION GR.
  • SCREW DRIVER ONE WAY FOR 6-8 SCREWS
  • 11pc. COMBINATION WRENCH SET 3/8″-1″
  • 14pc. COMBINATION WRENCH SET 6mm-19mm
  • 4pc. SCREW DRIVER SET #1&2 PH.-3″&4″SLOT
  • 51 PITCH SCREW GAGE 4 TO 84
  • PNEUMATIC STAPLE GUN 1/2 TO 1-1/2
  • SOLDER IRON, PENCIL TYPE 750 DEG. F
  • REPLACEMENT TIP FOR PENCIL TYPE SOLDER
  • SOLDER GUN KIT 200/260 WATTS
  • REPLACEM.TIP 5/8 FOR HEXACON SOLDER IRON
  • 3/8″ SOCKET HOLDER
  • 1/2″ SOCKET HOLDER
  • 1/2 23 pc. SK FACTIONAL STANDARD & DEE
  • 3/8″ 22 pc. SHALLOW/DEEP SOCKET SET METR
  • 3/8″ 47 pc. SK FACTIONAL/METRIC STANDARD
  • 3/8″ 21 pc. DEEP AND SHALLOW SOCKET SET
  • 3/8″ SOC 3/8″ DRIVE
  • 7/8″ SOC 1/2″ DRIVE DEEP WELL
  • 1/2″ 23 pc. DEEP AND SHALLOW SOCKET SET
  • SOUIX RIV NUT TOOL 1/4-20
  • SOUIX RIV NUT TOOL 5/16-18
  • #1343759 SWITCH FOR DAYTON 4Z90088 BENCH
  • T-201 PUSH TOOL FOR INSTALLING A HOSE ON
  • M8-15 TUBE BENDER NO. 2391 S
  • TABLE ELEVATION CRANK FOR DELTA DRILL
  • SCREW PITCH GUAGE 4 TO 84
  • 2″ SIDE LOADING TAPE GUN
  • SCREW PITCH GUAGE METRIC 0.25 TO 2.5
  • 10 PCS. T-HANDLE SET 3/32 – 3/8 BONDHUS
  • 2-15/16×37/64×9/16 TUBULAR MOUNT LEVEL
  • LEATHER TOOL POUCH W/ADJUSTABLE BELT
  • WRENCH FOR 5/16 TAMPER PROOF NUT
  • 11×5″ TROWEL
  • 7″x4″ CONCRETE TROWEL
  • TIN SNIP LEFT CUT RED
  • TIN SNIP RIGHT CUT GREEN
  • TIN SNIP STRAIGHT AND COMBINATION YELLOW
  • 7″ TIN SNIP STRAIGHT
  • 10″ TIN SNIP STRAIGHT
  • TANK SPRAYER 2 GAL. STEEL 7″ PUMP
  • TIN SNIP STRAIGHT 3″ CUT TO 20 ga.
  • 7″ TIN SNIP STRAIGHT
  • STRAIGHT & COMBO SNIPS W/GRIPS
  • TIN SNIP INLAID BLADE SNIPS (BULLDOG HD
  • 1/2 DRIVE UNIVERSAL JOINT
  • 11R VICE GRIP C CLAMP
  • 11SP VISE GRIP C CLAMP W/ SWIVEL PADS
  • #22 VICE GRIP SPRING (FITS 7R,7WR,9LN,-
  • 6R VICE GRIP C CLAMP 6-3/8″
  • 6SP VISE GRIP C CLAMP W/ SWIVEL PADS
  • #3 HAMMER WEDGE
  • #5 AXE WEDGE
  • C-400H BEEBE WINCH 2000 LB. DOUBLE
  • 3/8 THRU 1-1/4 14PC. COMB. WRENCH SET
  • WHEEL DRESSER FOR 16 TO 36″ 3 1/2″ FACE
  • DRESSER WHEEL FOR UP TO 10″ WHEEL 2″FACE
  • REFILL SET FOR WISSOTA #141
  • P15D-3H BEEBE WINCH 2000 LB. DOUBLE
  • 3/8″ 13 pc. SOCKET SET 3/8″ TO 7/8″
  • LEATHER WELDING ROD BAG W/BELT LOOP
    • TORCH
  • BUTANE TORCH W/DISPOSABLE TANK
  • PROPANE TORCH KIT W/ BOTTLE
  • SELF IGNITING PROPANE TORCH
  • DISPOSABLE FUEL CYLINDER
  • FLAMELESS HEAT GUN ELECTRIC CORD
  • REPLACEMENT FLINTS FOR STRIKERS
  • GB2001 REFILLABLE MICRO TORCH (BLAZER)
  • SELF IGNITING BUTANE TORCH W/DISP. TANK
  • LONG BLACK CAP FOR 17,18,26 TORCH
  • HEAT SHRINK PALM GUN W/LIGHTER
  • MT-50 MICROTORCH REFILLABLE BUTANE
  • REFILLABLE LIGHTER FOR UT-10 TORCH
  • 145 GRAM BUTANE FUEL CANISTER
  • WELDING TORCH STRIKERS
  • WELDING TORCH TIP CLEANER FOR CLEANING
  • UT-40Si ULTRATORCH BUTANE POWERED
    • VISE
  • #410P PIPE VISE 1/2″-4 1/2″ CAPACITY
  • #210 PIPE VISE 1/2″-2 7/8″ CAPACITY
  • MODEL 22 RIGID PIPE VISE JAW TYPE
  • MODEL 25 RIGID PIPE VISE 1/8″ TO 4″ PIPE
    • WILTON VISE
  • 16 PC. WILTON PUNCH & CHISEL SET BLUE GR
  • 4 LB. HAND DRILLING HAMMER 10-1/2 HANDLE
  • 60″ PINCH POINT CROWBAR 1-1/4″ STOCK
  • 1/2 X 13 WILTON PRY BAR
  • 18″ WILTON PRY BAR
  • 24″ WILTON PRY BAR
  • 1/4×1-3/8×14″ UTILITY BAR
  • 24″ WILTON CARPENTER’S WRECKING BAR
  • 30″ WILTON CARPENTER’S WRECKING BAR
  • 8″ HIGH CARBON STEEL SQUARE HEAD WEDGES
  • 0″-4″ WILTON 100 SERIES C-CLAMP HVY DUTY
  • 2″-6″ WILTON 100 SERIES C-CLAMP HVY DUTY
  • 6″ CONVENTIONAL DRILL PRESS VISE
  • 6″ CAM/QUICK ACTION DRILL PRESS VISE
  • 7 1/2″ WILTON MILLING MACHINE VISE
  • 6″ HIGH VISIBILITY SAFETY SWIVEL VICE
  • REPLACEMENT COPPER SPINDLE FOR 6524A & P
  • 5-1/2″ WILTON TRADESMAN HEAVY DUTY VISE
  • 1760 WILTON 6″ VISE
  • 6-1/2″ WILTON TRADESMAN VISE SWIVEL BASE
  • REPLACEMENT JAWS FOR 1765 WILTON VISE
  • 1/4 x 12 LINING UP/DRIFT PUNCH ECONOMY
  • 5/16 x 12 LINING UP/DRIFT PUNCH ECONOMY
  • 10 PC. WILTON PUNCH KIT
  • 5 PC EXTRA LONG PIN PUNCH KIT
  • 5 PC. WILTON DRIFT PIN PUNCH KIT
  • WILTON W6-DRIVER SCREW DRIVER GEN. PURP.
  • WILTON W6-DRIVER SCREW DRIVER AUTOMOTIVE
  • WILTON W6-DRIVER SCREW DRIVER HEX DRIVER
  • WILTON W6-DRIVER SCREW DRIVER PROFES.
  • REPLACEMENT COPPER PAD FOR L-CLAMPS
  • WILTON JUNIOR ERGONOMIC WORK POSITIONER
  • 26 PC. WILTON CHISEL & PUNCH KIT BLUE
  • 4″ WILTON MACHINISTS’ BENCH VISE
  • 0″-2-1/8″ WILTON C-CLAMP DROP-FORGED
  • 0″-3″ WILTON C-CLAMP DROP-FORGED
  • 0″-4-1/2″ WILTON C-CLAMP DROP-FORGED
  • 4-1/2 WILTON COPPER JAW CAPS
  • 5 WILTON COPPER JAW CAPS
  • 0″-6-1/16″ WILTON C-CLAMP DROP-FORGED
  • 0″-8-1/4″ WILTON C-CLAMP DROP-FORGED
  • 0″-8-1/4″ WILTON 400 SERIES SLIPNOT C-CL
  • 2″-10-1/8″ WILTON C-CLAMP DROP-FORGED
  • 2″-10″ WILTON 400 SERIES SLIPNOT C-CLAMP
  • 2″-12-1/4″ WILTON C-CLAMP DROP-FORGED
  • 3″ WILTON HOLD DOWN CLAMP
  • 2-8″x6″ THROAT C-CLAMP REG. DUTY DROP FG
  • 3/4″ REG. THROAT PIPE CLAMP FIXTURE w/
  • 4-1/2″ WILTON MACHINISTS’ BENCH VISE
  • #452 PIPE CLAMP SET FOR 1/2″ PIPE
  • 12″ ECONOMY SERIES L-CLAMP 2500 LBS.
  • 3-11/32″ WILTON 90 DEG WELDERS VISE
  • #643 1/2″ WILTON 3 1/2″ PIPE VISE
  • #644 WILTON 4″ BENCH VISE SWIVEL BASE
  • REPLACEMENT JAWS FOR 645 VISE
  • 8″ WILTON UTILITY VISE SWIVEL BASE
  • 12″ WILTON COPPER PLATED L CLAMP
  • 20″ WILTON COPPER PLATED L CLAMP
  • 20″ HEAVY DUTY “C” CLAMP 4800 LBS. W/
  • 24″ WILTON COPPER PLATED L CLAMP
  • 6-1/2″ WILTON UTILITY BENCH VISE SWIVEL
  • 4″ WILTON MECHANIC’S VISE SWIVEL BASE
  • 5″ WILTON MECHANIC’S VISE SWIVEL BASE
  • 6″ WILTON MECHANIC’S VISE SWIVEL BASE
  • 2 1/4″ WILTON HANDSCREW CLAMPS 2″ THROAT
  • 3″ WILTON HANDSCREW CLAMPS 3″ THROAT
  • 12″x9-1/4″x6″ HANDSCREW CLAMP WOODEN
  • 14″x10-3/4″x7″ HANDSCREW CLAMP WOODEN
  • 2-1/2″ WILTON CLAMP-ON BENCH VISE
  • 0″-6″ WILTON 4400 SERIES FORGED C-CLAMP
  • 3-5/8×5/8 SAFE-T-GRIP HANDLES
  • 5-1/8×9/16 SAFE-T-GRIP HANDLES
    • BAND SAW BLADES
  • 3/16×44-7/8″ 18 TOOTH PORTABLE BAND
  • 1/4×147″x.025 6 TOOTH RACKER TOOTH BAND
  • 1/4×147″x.025 10 TOOTH RACKER TOOTH BAND
  • 3/8×59-1/4″ .020 10-14 TOOTH BAND SAW
  • 3/8×118″x.025 14 RACKER TOOTH BAND SAW
  • 1/2×44-7/8″x.020 10/14 TOOTH PORTABLE
  • 1/2×44-7/8″x.020 14/18 TOOTH PORTABLE
  • 1/2×44-7/8″x.020 14 TOOTH PORTABLE BAND
  • 1/2×44-7/8″x.020 18 TOOTH PORTABLE
  • 1/2×44-7/8″x.020 24 TOOTH PORTABLE
  • 1/2×5′ .032 14 RACKER TOOTH
  • 1/2×64-1/2″ .025 10 RAKER TOOTH BAND
  • 1/2×64-1/2″ .035 10-14 VARY TOOTH BAND
  • 1/2×64-5/8″ .035 10-14 VARY TOOTH BAND
  • 1/2×65″x.025×10 RAKER TOOTH
  • 1/2″x68″x.025″x10-14 V.T. DIEMASTER 2
  • 1/2×68″x.025 18 RAKER TOOTH BAND SAW
  • 1/2×4 1/2’x14 RAKER TOOTH BAND SAW
  • 1/2×89″x.025 8-12 VARY TOOTH BSB BI-MAT
  • 1/2×92″x.025 6 RAKER TOOTH BAND SAW
  • 1/2×92″x.025 10 RAKER TOOTH BAND SAW
  • 1/2×93-3/4x.025×14 RACKER TOOTH BI-METAL
  • 1/2×112″x.025 14-18 VARY TOOTH BAND SAW
  • 1/2×112″x.025 6-10 VARY TOOTH BAND SAW
  • 1/2×147″x.025 8-12 VARY TOOTH BSB BI-MAT
  • 1/2×150″x.025 10 RAKER TOOTHBAND SAW BLD
  • 5/8×102″x.032 10-14 RAKER TOOTH BAND
  • 5/8×110″x.032 10 RAKER TOOTH BAND SAW
  • 5/8×114″x.032 10-14 RAKER TOOTH BAND
  • 3/4×93-1/2″x.035×10 RACKER TOOTH NEOBACK
  • 3/4×93″x.035 10-14 VARY TOOTH BAND
  • 3/4×93″x.035 10 RAKER TOOTH BAND SAW
  • 3/4×93″x.035 6-10 VARY TOOTH BAND
  • 3/4×93″x.035 8-12 VARY TOOTH BAND
  • 3/4×93″x.035 6-10 VARY TOOTH BAND SAW
  • 3/4×98″x.035 8-12 VARY TOOTH MATRIX BSB
  • 3/4×104″x.035 8-12 RAKER TOOTH BAND
  • 3/4×8′ 10-1/2″ .032 14 RACKER TOOTH
  • 3/4×107″x.035 8-12 RAKER TOOTH BAND
  • 3/4×108″x.035 8-10 RAKER TOOTH BAND
  • 3/4×9’5-1/2″x.035 5-8 VARI TOOTH MATRIX
  • 3/4×9’5-1/2″x.032 6-10VARI TOOTH MATRIX
  • 3/4×9′ 6″.032 6-10VARI TOOTH MATRIX
  • 3/4×9′ 7-1/2″x.032 X 14 RAKER TOOTH
  • 3/4×115-1/2″x.035 x 10 RAKER TOOTH
  • 3/4×115-1/2″x.035 X 14 RAKER TOOTH
  • 3/4×11′ 4″ .032 6-10VARI TOOTH MATRIX
  • 3/4x137x14 RAKER TOOTH BAND SAW BLADE
  • 3/4×11′ 5″x.035×18 VARI TOOTH NEO BAND
  • 3/4×11′ 5″ .032 8-12VARI TOOTH SUPER
  • 3/4×11′ 6″x.032 10 TOOTH BANS SAW BLADE
  • 3/4×11′ 6″ .032 6-10VARI TOOTH MATRIX
  • 3/4×11′ 6″ .032 8-12VARI TOOTH SUPER
  • 3/4×160″x.035 6 TOOTH BAND SAW BLADE NEO
  • 3/4×19″ 6″x.032×14 RAKER TOOTH
  • 3/4×22’x.035×3 HOOK BAND SAW BLADE NEO
  • 1×97-1/2″x.035×14 RAKER TOOTH BAND SAW
  • 1×115-1/2″x.032×14 RAKER TOOTH
  • 1×115″x.032×10-14 VARI TOOTH MATRIX BAND
  • 1×115″x.032×14 RAKER TOOTH NEO BACK
  • 1×116-1/2″x.032×8-12 VARY TOOTH MATRIX
  • 1×117″x.035×10-14 VARI TOOTH MATRIX BAND
  • 1″x119-1/2×035 4-6 VARY TOOTH BAND SAW
  • 1″x119-1/2×035 10-14 VARY TOOTH BAND SAW
  • 1″x119-1/2×035 8-12 VARY TOOTH BAND SAW
  • 1″x119-1/2×035 8 RAKER TOOTH BAND SAW
  • 1x120x.035×10 RAKER TOOTH BAND SAW BLADE
  • 1″x133-1/2×10-14 VARY TOOTH BAND SAW
  • 1″x136″ 10 RAKER TOOTH BAND SAW BLADE
  • 1″x137″x14 RAKER TOOTH BAND SAW BLADE
  • 1″x137″x8-12 VARY TOOTH MATRIX BAND
  • 1″x138″x14 RAKER TOOTH BAND SAW
  • 1″x138″x8-12 RAKER TOOTH BAND SAW
  • 1×144″x.035×10-14 VARI TOOTH CLASSIC SAW
  • 1×12’6″x.035×10-14 VARY TOOTH BAND SAW
  • 1×15’x .032×8-12 VARI TOOTH
  • 1×15′ 1″x.032×5-8 VARI TOOTH
  • 1×15’1″x.035×8-12 VARI TOOTH BAND SAW
  • 1″x15’1″x10-14 VARY TOOTH BAND SAW BLADE
    • CIRCULAR SAW BLADE
  • 4-1/2 DIAMOND CONTINUOUS RIM TURBO BLADE
  • 6-1/2x20x5/8 CIRCULAR SAW BLADE CARBIDE
  • 7-1/4×1/2×24 T. SKILL SAW BLADE CARBIDE
  • 7-1/4xDIA.(5/8)x24T SKILL SAW BLADE
  • 7-1/4×1/2×26 T. SKILL SAW BLADE
  • 8×5/8x40x.085-.087 MCT SAW BLADE CARBIDE
  • 8×42 TOOTH METAL CUTTING CARBIDE TOOTH
  • 8×5/8x48x1/8TH. SKILL SAW BLADE CARBIDE
  • 10×5/8×192 TOOTH CIR. SAW BLADE/METAL
  • 10×5/8×50 TOOTH PLANER CIRCULAR SAW
  • 12x1x100 TCG CSB NON-FERROUS
  • 12x1x24 TOOTH CIRCULAR SAW BLADE RIP
  • 12x1x60 TOOTH CIRCULAR SAW BLADE
  • 12x1x80x.094 ATB CIR. SAW BLADE CARBIDE
  • 12x1x80 TOOTH CSB NON FERROUS METAL
  • 12x1x80 TOOTH CIRCULAR SAW BLADE CARBIDE
  • 14x1x100 TCG CSB NON-FERROUS
  • 14×1 HIGH SPEED DIAMOND CIRCULAR SAW
  • 14x1x70 TOOTH CARBIDE CHIP SAW DW7747
  • 14x1x72 TOOTH CARBIDE TIP FOR STEEL 1800
  • 14x1x80 TOOTH CARBIDE TRIPLE CHIP SAW
  • 16x1x60 TOOTH CIRCULAR SAW BLADE TCG
  • 18x1x60 TOOTH CIRCULAR SAW BLADE TCG
    • HACKSAW BLADE
  • 12×14 TOOTH HACKSAW BLADE
  • 12×18 TOOTH HACK SAW BLADE
  • 12×24 TOOTH HACKSAW BLADE
  • 12×32 TOOTH HACKSAW BLADE
  • 12x1x.050 6-10 VARY TOOTH HACK-MASTER
  • 14x1x.050 6-10 VARY TOOTH HACK-MASTER
    • HEX-HOLE SAW ARBOR
  • 1/2″ HEX-HOLE SAW ARBOR FOR 9/16×1-3/16
  • 1/2″ HEX-HOLE SAW ARBOR FOR 1-1/4 THR 6
  • 1/4″ ROUND HOLE SAW ARBOR FOR 9/16x
  • 3/8″ HEX-HOLE SAW ARBOR FOR 9/16//1-1/4″
  • 3/8″ HEX-HOLE SAW ARBOR FOR 1-1/4×6
  • 3/8″ QUIKIJEX SAW ARBOR FOR 1-1/4×6
    • HEX-HOLE SAW ARBOR EXTENTION
  • 10″ HOLE SAW ARBOR FITS 5L-6L
  • 12″ HOLE SAW ARBOR EXTENTION FITS 1L-2L
  • 18″ HOLE SAW ARBOR EXTENTION FITS 1L-2L
  • 5-1/2″ HOLE SAW ARBOR EXT. FITS 1L-2L
    • HOLE SAW BLADE
  • 9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6-5/8″ 2-PIECE VARIABLE PITCH HOLE SAW
  • 5/8″ STARRETT VARIABLE PITCH HOLE SAW
  • 11/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6-7/8″ GREENLEE CANLIGHT HOLE SAW
  • 3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 13/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 7/8″ CARBIDE HOLE SAW
  • 15/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 3/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-5/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-3/8″ AUTOMATIC FEED WOOD BIT HOLE SAW
  • 1 7/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 11/16″ BI-METAL VARIABLE PITCH HOLE SW
  • 1 3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 13/16″ BI-METAL VARIABLE PITCH HOLE SW
  • 1-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2″ CARBIDE TOOTH HOLE SAW
  • 2-1/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-5/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/2″ CARBIDE TOOTH HOLE SAW
  • 2-9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-3/8″ BI-METAL VARIALBE PITCH HOLE SAW
  • 3-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/2″ CARBIDE TOOTH HOLE SAW
  • 3-5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-5/8″ CARBIDE TOOTH HOLE SAW
  • 3-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4″ CARBIDE TIPPED HOLE SAW
  • 4-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/8″ MAGNA VARIABLE PITCH HOLE SAW BI-
  • 4-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/2″ CARBIDE TIPPED HOLE SAW
  • 4-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1/2″ HEX-HOLE SAW ARBOR FOR 9/16×1-3/16
  • 1/2″ HEX-HOLE SAW ARBOR FOR 1-1/4 THR 6
  • 1/4″ ROUND HOLE SAW ARBOR FOR 9/16x
  • 3/8″ HEX-HOLE SAW ARBOR FOR 9/16//1-1/4″
    • HOLE SAW KIT
  • HOLE SAW KIT 7 SIZES 7/8″-2-1/8″ w/CASE
  • HOLE SAW KIT SIZES 7/8 to 2-1/2″ w/CASE
  • ARBORED HOLE SAW KIT 5 SIZES 7/8″-1-1/2″
  • ELECTRICIAN HOLE SAW KIT 7/8″ TO 2 1/2″
  • 1200L DELUXE HOLE SAW KIT 12 SIZES
  • HOLE SAW KIT 10 SIZES 7/8″-4-3/4″ w/CASE
  • HOLE SAW KIT 16 SIZES 3/4″-4-3/4″ w/CASE
  • HOLE SAW KIT SIZES 7/8″-2-1/2″ w/CASE
  • HOLE SAW KIT SIZES 3/4″-2-1/4″ w/CASE
    • JIG SAW BLADE
  • 4x6TPI JIG SAW BLADE WOOD BOSCH STYLE
  • 4x10TPI JIG SAW BLADE METAL BOSCH STYLE
  • 4″ BOSCH SCROLL CUT JIG SAW BLADE
  • 5-1/4x14TPI JIG SAW BLADE METAL BOSCH ST
  • 3×3/8x.037 14 TOOTH JIG SAW BLADE #314J
  • 3×3/8x.037 18 TOOTH JIG SAW BLADE
  • 3×3/8x.037 24 TOOTH JIG SAW BLADE #324J
  • 3×3/8x.037 24 T. JIG SAW BLADE T-SHANK
  • 3-1/8×5/16x.040 JIG SAW BLADE
  • 5-1/4×3/8x.050 18 TOOTH JIG SAW BLADE
  • 3 1/2×3/8x.050 10/14 TOOTH JIG SAW
  • 3-1/2×1-1/8x.050 6/10 TOOTH JIG SAW
  • 4-1/2×3/8x.050 10 TOOTH JIG SAW BLADE
  • 4-1/2×3/8x.050 6 TOOTH JIG SAW BLADE
  • 7 pc. JIG SAW BLADE ASSORTMENT w/PL. BOX
    • PVC SAW BLADE
  • 8″ CARBIDE TIP BLADE FOR STEEL FITS
  • 12″ BLADE FOR PVC HAND SAW
  • 18″ BLADE FOR PVC HAND SAW
  • 12″ HAND SAW FOR PLASTIC PIPE
  • 18″ HAND SAW FOR PLASTIC PIPE
    • RECIPROCATING SAW BLADE
  • 8-32×5/8ODx1/2THK RUBBER STUD BUMPER
  • 8-32×5/8ODx1/2THK RUBBER STUD BUMPER
  • 1/4-20×3/4ODx1/2 THK RUBBER STUD BUMPER
  • 1/4-20×3/4ODx1/2 THK RUBBER STUD BUMPER
  • 1/4-20×3/4ODx1/2 THK RUBBER STUD BUMPER
  • 3×3/16x.037×18 TEETH JIG SAW BLADE METAL
  • 3×3/16x.037×24 TEETH JIG SAW BLADE THIN
  • 3×1/4x.032×14 TEETH PER IN. RECIP. SAW
  • 3×1/4x.032×18 TEETH PER IN. RECIP. SAW
  • 3 5/8×3/6x.032×14 TOOTH RECIP BLADE
  • 4×3/4x.035×14 TEETH PER IN. HVY GA.
  • 4×3/4x.035×18 TEETH PER IN. HVY GA.
  • 4×3/4x.035×24 TEETH PER IN. HVY GA.
  • 6×3/4x.032 MEDIUM GRIT CARBIDE RECIP SAW
  • 6×3/4x.035×6 TPI RECP. BLADE WOOD 606R
  • 6×3/4x.050×6 TPI. WOOD RECP. SAW BLADE
  • 6×3/4x.050×10/14 TPI DEMOLITION RECEP.
  • 6×3/4x.035×10 TPI WOOD-ALUMIN RSB 610R
  • 6×3/4x.035×14 RAKER RECR. SAW 614R
  • 6×3/4x.035×18 TEETH METAL/CONDUIT 618R
  • 6×3/4x.035×24 TEETH PER IN. METAL 624R
  • 8×3/4x.050×10 TPI RECP. SAW BLADE 810R
  • 8×3/4x.035×18 TEETH PER IN. REC. SAW BLD
  • 9×3/4x.050×6 TEETH PER IN. FOR WOOD RECP
  • 10×3/4x.05 MEDIUM GRIT CARBIDE RECIP SAW
  • 12×3/4x.050×6 TEETH PER IN. FOR WOOD
  • 12×3/4x.050×10 TEETH PER IN. FOR
  • 12x1x.042×10 TPI LAZER BLADE HEAVY METAL
  • 16 pc. RECIP BLADE KIT 810R-818R-956R-
  • RUBBRER BOOT FOR SWITCHES
  • 3×1/4x.032x24T BI-METAL RECIP. SAW BLADE
    • BURRS
  • 1/8×1/2×2 CYLINDRICAL SHAPE END CUT DBL.
  • 1/8×1/2×2 RADIUS END CYLINDER SHAPE DBL.
  • 3/16×5/8×2 CYLNDRICAL CARB. BURR SINGLE
  • 1/4×5/8×2 CYLNDRICAL CARBIDE BURR SINGLE
  • 1/4×5/8×2 CYLNDRICAL CARBIDE BURR DBL
  • 1/4×5/8×2 RADIUS END TREE CARB BURR DBL.
  • 1/4×3/4×2 1/2 CYL CARBIDE BURR DOUBLE
  • 1/4x1x2 CYLINDRICAL CARBIDE BURR DOUBLE
  • 1/4x1x2 RADIUS END CYL. CARB. BUR DOUBLE
  • 5/16×3/4×2 1/2 FLAME CUT DBL CUT SH-2
  • 5/16×3/4×2-1/2 CYL END CUT DBL CUT SB-2
  • 3/8×3/4×2-1/2 CYLINDRICAL CARBIDE BURR
  • 3/8×3/4×2-1/2 CYLINDRICAL CARB. BURR DBL
  • 3/8×3/4×2-1/2 RADIUS END CYL. SHAPE DBL.
  • 3/8×3/4×2-1/2 RADIUS END TREE POINTED
  • 1/2×3/8 CONCAVE SHAPE BURR
  • 1/2×7/8×2-3/4 CONE POINT DOUBLE CUT BURR
  • 1/2x1x2-3/4 CYL. SINGLE CUT BURR SA-5
  • 1/2x1x2-3/4 CYL. DOUBLE CUT BURR SA-5
  • 1/2x1x2-3/4 CYL. END CUT SINGLE CUT BURR
  • 1/2x1x2-3/4 CYL. END CUT DBL.CUT SB-5
  • 1/2x1x2-3/4 RADIUS END CARBIDE BUR SING-
  • 1/2x1x2-3/4 RADIUS END CARBIDE BUR DOU-
  • 1/2x1x6 E-L RADIUS END CARBIDE BUR DOU-
  • 1/2x1x2-3/4 POINTED TREE BURR SINGLE CUT
  • 1/2x1x2-3/4 POINTED TREE BURR DOUBLE CUT
  • 1/2×1-1/8×3 TAPER SHANK 14′ RADIUS END
  • 5/8x1x2-3/4 CYLINDRICAL CARB DBL/CUT BUR
  • 5/8x1x2-3/4 TREE RADIUS CARB DBL/CUT BUR
  • 5/8x1x2-3/4 TREE PT. END DBL/CUT BURR
  • 1x1x3 CYLINDRICAL CARB BUR DBL CUT
  • 1/4×1/4 DOUBLE CUT BUR SET 12 PCS.
    • COUNTERSINK
  • 5/32-13/32×1/4 82′ COUNTERSINK & DEBURR
  • 3/16-17/32×1/4 82′ COUNTERSINK & DEBURR
  • 1/4×1/4 6-FLUTE 82′ COUNTERSINK HSS
  • 5/16X1/4 1-FLUTE 82′ COUNTERSINK HSS
  • 5/16×3/8×82′ POINTED COUNTERSINK 82-AG
  • 3/8×1/4 1-FLUTE 82′ COUNTERSINK HHS
  • 1/2×1/4 1-FLUTE 60′ COUNTERSINK 2″ OAL
  • 1/2×1/4 1-FLUTE 82′ COUNTERSINK HHS
  • 5/8×3/8×82′ 3 FL COUNTERSINK HI-SPD
  • 5/8×3/8 3-FL 60′ COUNTERSINK HI-SPD
  • 5/8×3/8 6-FL 60′ COUNTERSINK 3″ OAL CARB
  • 3/4×1/2 1-FLUTE 82′ COUNTERSINK HHS
  • 3/4×1/2 3-FLUTE 82′ COUNTERSINK HHS
  • 3/4×1/2 6-FLUTE 60′ CHATTERLESS COUNTER-
  • 3/4×1/2 6-FL 60′ COUNTERSINK 3″ OAL CARB
  • 1×1/2 1-FLUTE 82′ COUNTERSINK HHS
  • 5 PC. COUNTERSINK SET 1/4-3/8-1/2-3/4-1″
    • END MILLS
  • 3/32×9/32×1/8×4 FL CEN/CUT CARBIDE S.E.
  • 3/32×5/16×1/8×2 FL CEN/CUT CARBIDE S.E.
  • 1/8×1/4×1/8×4 FL CEN/CUT CARB. D.E. STUB
  • 1/8×3/8×1/8×4 FL CEN/CUT CARBIDE S.E.
  • 1/8×3/8×3/8×2 FL END MILL BALL END
  • 1/8×3/8×3/8×4 FL END MILL CENTER CUT
  • 1/8×1/2×1/8×2 FL END MILL CENTER CUT
  • 1/8×1/2×1/8 SH.x2 FL. SINGLE END SQUARE
  • 1/8x1x1/8×2 FL X-LONG CEN/CUT CARBIDE SE
  • 5/32×5/16×3/16×2 FL. D.E. END MILL SQUAR
  • 5/32×5/16×3/16×4 FL. D.E. END MILL SQUAR
  • 5/32×1/2×3/16×4 FL. BALL NOSE SE CARBIDE
  • 3/16×3/8×3/16×4 FL DBL END MILL CARB/TIN
  • 3/16×1/2×3/8×4 FL CEN/CUT HSS S.E. END
  • 3/16×7/16×3/8×2 FL CEN/CUT HSS S.E. END
  • 3/16×1/2×3/8×2 FL BALL END HSS S.E. END
  • 3/16×5/8×3/16×2 FL CEN/CUT CARBIDE S.E.
  • 3/16×5/8×3/16×4 FL CEN/CUT CARBIDE S.E.
  • 3/16×3/4×3/8×2 FL CEN/CUT HHS S.E. X-LNG
  • 3/16×1/2×3/8 SH.x4 FL ROUGHING END MILL
  • 7/32×5/8×1/4×4 FL CEN/CUT CARBIDE S.E.
  • 1/4×1/2×1/4×2 FL. D.E. END MILL SQUARE
  • 1/4×1/2×1/4 SH.x4 FLUTE DOUBLE END END
  • 1/4×1/2×3/8×2 FL END MILL CENTER CUT
  • 1/4×1/2×3/8×2 FL. D.E. END MILL SQUARE
  • 1/4×5/8×3/8×3 FL. ROUGHING E. M. COBALT
  • 1/4×5/8×3/8×4 FL. D.E. END MILL SQUARE
  • 1/4×3/4×1/4×4 FL CEN/CUT CARBIDE S.E.
  • 1/4×1-1/4×3/8×2 FL X-LONG E. MILL CENTER
  • 9/32×3/4×5/16×4 FL CEN/CUT CARBIDE S.E.
  • 3/8×9/16×3/8 SH.x4 FLUTE DOUBLE END END
  • 5/16×3/4×3/8 SH.x4 FL ROUGHING END MILL
  • 5/16×13/16×5/16×4 FL CEN/CUT CARBIDE S.E
  • 11/32x1x3/8×4 FL CEN/CUT CARBIDE S.E.
  • 3/8×9/16×3/8 SH.x4 FLUTE DOUBLE END END
  • 3/8×3/4×3/8×4 FL. ROUGHING COBALT END
  • 3/8×3/4×3/8×4 FL. ROUGHING END MILL HSS
  • 3/8×3/4×3/8×4 FL. D.E. END MILL SQUARE
  • 3/8x1x3/8×4 FL BALL NOSE CARBIDE S.E END
  • 3/8x1x3/8×4 FL CEN/CUT CARBIDE S.E. END
  • 3/8×7/8×3/8 SH.x2 FLUTE SINGLE END SQU.
  • 7/16x3x7/16×4 FL CEN/CUT CARBIDE S.E. X-
  • 1/2×5/8×1/2×4 FL D.E. CEN/CUT CARBIDE
  • 1/2x1x1/2×2 FL CEN/CUT CARBIDE S.E.
  • 1/2x1x1/2×2 FL CEN/CUT HHS S.E. END MILL
  • 1/2x1x1/2×2 FL CEN/CUT CARBIDE S.E. END
  • 1/2x1x1/2×4 FL CEN/CUT CARBIDE S.E.
  • 1/2x1x1/2 SH.x4 FLUTE END MILL CARBIDE
  • 1/2×1-1/4×1/2SHx4 FL CENTER CUT END MILL
  • 1/2×1-1/4×1/2×4 FL ROUGHING COBALT END
  • 9/16×1-1/8×9/16×4 FL CEN/CUT CARBIDE S.E
  • 9/16×1-1/4×9/16×4 FL. SINGLE END SQUARE
  • 5/8×1-1/4×5/8×4 FL CEN/CUT CARBIDE S.E.
  • 5/8×1-1/4×5/8 SHx4 FLUTE END MILL SOLID
  • 5/8×1-5/8×5/8SHx4 FL ROUGHING END MILL
  • 3/4×1-1/2×3/4×2 FL. SINGLE END SQUARE
  • 3/4×1-1/2×3/4×4 FL CEN/CUT CARBIDE S.E
  • 3/4×1-1/2×3/4 SHx4 FLUTE END MILL SOLID
  • 3/4×1-5/8×5/8×4 FL. SINGLE END SQUARE
  • 3/4x3x3/4×4 FL COBALT END MILL SQ END
  • 7/8×1-7/8×3/4SHx4FL SINGLE END MILL TiN
  • 1″x4″OAx5/8″SHANKx6 FLUTE END MILL
  • 1-1/4×1-5/8×3/4×2 FL. SINGLE END SQUARE
  • 1-1/4×1-3/4×3/4×6 FL. SINGLE END SQUARE
  • 1-3/8x2x3/4×6 FL. SINGLE END SQUARE
  • 1-1/2×1-5/8×1/2×2 FL SINGLE END HHS MILL
  • 1-1/2x2x3/4×6 FL SINGLE END HHS END MILL
  • 1-1/2x2x1-1/4x6FL SINGLE END CENTER CUT
  • 1-3/4x2x3/4x6FL SINGLE END HHS 4-1/4 OAL
    • HEX DIE
  • M4x.70 HEX DIE 1″ HEX
  • M5x.80 HEX DIE 1″ HEX
  • M6x1.0 HEX DIE 1″ HEX
  • M8x1.25 HEX DIE 1″ HEX
  • M10 x1.25 HEX DIE 1″ HEX
  • M10 x1.50 HEX DIE 1″ HEX
  • M12 x1.25 HEX DIE 1-1/16 HEX
  • M12 x1.50 HEX DIE 1″ HEX
  • M12 x1.75 HEX DIE 1″ HEX
  • M16 x2.00 HEX DIE 1″ HEX
    • ROUTER BITS
  • 3/16x1x1/4 1 FL. CARBIDE TIP ROUTER BIT
  • 1/4×1/4×1/4 FLUSH TRIMMER ROUTER BIT
  • 1/4×7/8×1/4 2 FL. CARBIDE TIP ROUTER BIT
  • 1/4x1x1/4 1 FL. HIGH SPEED ROUTER BIT
  • 1/4x1x1/4 1 FL. CARBIDE TIP ROUTER BIT
  • 1/4x1x1/4 2 FL. HSS ROUTER BIT STRAIGHT
  • 1/4x1x1/4 2 FL. CARBIDE TIP ROUTER BIT
  • 1/4x1x1/4 2 FL. CARBIDE TIP ROUTER BIT
  • 1/2×2-1/2×1/2 2FL CARBIDE TIP ROUTER BIT
  • 3/4×1-1/8×1/2 2FL CARBIDE TIP ROUTER BIT
  • 13/16×1-1/8×1/2 2FL CARB. TIP ROUTER BIT
  • 1×3/4×1/2 2 FL CARBIDE TIP ROUTER BIT
  • 1 1/4×1/2×1/4 CARBIDE TIP RABBIT BIT
  • RECESSED BUMPER 1×1-1/2 w/5/32 THR HOLE
  • 1 3/8×5/8×1/4 CARBIDE TIP COVE BIT
  • 1 1/2×13/16×1/4 BEADING BITS W/BEARINGS
  • 1 1/2×13/16×1/4 CORNER ROUNDING BIT
  • 1 5/8×3/8×1/2 STILE AND RAIL BIT
    • TAPS
  • 2-56 3 FLUTE PLUG TAP HI-CARBON STEEL
  • 2-56 2-FLUTE SPIRAL PT PLUG TAP 20-AG
  • 4-40 3 FLUTE BOTTOM TAP HI-CARBON STEEL
  • #4-36 PLUG TAP
  • #4-40 2-FLUTE SPIRAL POINT TAP #20-AG
  • 4-40 3 FLUTE TAPER TAP 23-AG
  • 4-40 3 FLUTE PLUG TAP HI-CARBON STEEL
  • #5-40 BOTTOM TAP
  • #5-40 PLUG TAP
  • #5-40 TAPPER TAP 3-FLUTE
  • #5-44 2-FLUTE SPIRAL POINT TAP #20-AG
  • #6-32 BOTTOM TAP
  • 6-32 NC PLUG TAP TYPE 721
  • #6-32 2-FLUTE SPIRAL POINT TAP #20-AG
  • #6-32 TAPER TAP 3-FLUTE
  • 6-32 PLUG TAP FOR THREAD INSERTS
  • #6-40 BOTTOM TAP
  • #6-32 PLUG TAP
  • #6-40 2-FLUTE SPIRAL POINT TAP #20-AG
  • #8-32 BOTTOM TAP
  • #8-32 COMBINATION DRILL AND TAP
  • #8-32 PLUG TAP 4-FLUTE
  • #8-32 2-FLUTE SPIRAL POINT TAP #20-AG
  • 8-32 TAPER TAP
  • 8-32 PLUG TAP FOR THREAD INSERTS
  • #8-36 BOTTOM TAP COBALT
  • #8-36 PLUG TAP
  • #10-24 BOTTOM TAP
  • #10-24 COMBINATION DRILL AND TAP
  • 10-24 NC PLUG TAP TYPE 721
  • #10-24 2-FLUTE SPIRAL POINT TAP #20-AG
  • #10-24 +.005 OVERSIZE SPIRAL POINT TAP
  • 10-24 TAPER TAP
  • 10-24 PLUG TAP FOR THREAD INSERTS
  • #10-32 BOTTOM TAP
  • #10-32 BOTTOM TAP .003 OVERSIZED
  • #10-32 COMBINATION DRILL AND TAP
  • #10-32 PLUG TAP
  • #10-32 2-FLUTE SPIRAL POINT TAP #20-AG
  • 10-32 TAPER TAP
  • 10-32 PLUG TAP FOR THREAD INSERTS
  • 12-24 NC BOTTOM TAP TYPE 761
  • 12-24 COMBINATION DRILL AND TAP
  • 12-24 NC PLUG TAP TYPE 721
  • #12-24 2-FLUTE SPIRAL POINT TAP #20-AG
  • #12-24 TAPER TAP
  • 12-28 NC PLUG TAP TYPE 721
  • 1/8 PIPE TAP
  • 1/8 PIPE TAP HIGH SPEED STEEL
  • 1/4-19 BSP BOTTOM TAP
  • 1/4-20 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 1/4-20 4 FLUTE BOTTOM TAP 25-AG
  • 1/4-20 COMBINATION DRILL AND TAP
  • 1/4-20 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 1/4-20 PLUG TAP SPIRAL FLUTED 3 FLUTE
  • 1/4-20 PLUG TAP FOR THREAD INSERTS
  • 1/4-20 2-FL SPIRAL POINT PLUG TAP 20-AG
  • 1/4-20 4 FLUTE TAPER TAP HI-CARBON STEEL
  • 1/4-20 4 FLUTE TAPER TAP 23-AG
  • 1/4-28 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 1/4-28 4 FLUTE BOTTOM TAP 25-AG
  • 1/4-28 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 1/4-28 PLUG TAP FOR THREAD INSERTS
  • 1/4-28 2-FLUTE SPIRAL PT. PLUG TAP 20-AG
  • 1/4-28 4 FL. TAPER TAP HI-CARBON STEEL
  • 1/4-28 4 FLUTE TAPER TAP 23-AG
  • 1/4-28 3-FLUTE TAPER TAP M-42 COBALT
  • 1/4-18 PIPE TAP
  • 1/4-18 PIPE TAP HIGH SPEED STEEL
  • 5/16-18 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 5/16-18 4 FLUTE BOTTOM TAP 25-AG
  • 5/16-18 COMBINATION DRILL AND TAP
  • 5/16-18 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 5/16-18×6 OAL PULLEY TAP PLUG CHAMFER
  • 5/16-18 2-FLUTE SPIRAL POINT TAP #20-AG
  • 5/16-18 4 FLUTE TAPER TAP HI-CARBON ST.
  • 5/16-18 4 FLUTE TAPER TAP 23-AG
  • 5/16-24 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 5/16-24 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 5/16-24 2-FLUTE SPIRAL PT PLUG TAP 20-AG
  • 5/16-24 4-FLUTE TAPER TAP HI-CARBON ST.
  • 5/16-32 PLUG TAP
  • 3/8-16 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 3/8-16 4 FLUTE BOTTOM TAP 25-AG
  • 3/8-16 COMBINATION DRILL AND TAP
  • 3/8-16 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 3/8-16 PLUG TAP FOR THREAD INSERTS
  • 3/8-16 3-FLUTE SPIRAL PT PLUG TAP 20-AG
  • 3/8-16 SPIRAL FLUTED TAP 52 DEG. PLUG
  • 3/8-16 SPIRAL PT TAP FOR THREAD INSERTS
  • 3/8-16 4 FLUTE TAPER TAP HI-CARBON STEEL
  • 3/8-16 4 FLUTE TAPER TAP 23-AG
  • 3/8″ TAP EXTRACTOR 4 FLUTE
  • 3/8-24 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 3/8-24 BOTTOMING TAP .0005 OVERSIZED
  • 3/8-24 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 3/8-24 3-FLUTE SPIRAL PT PLUG TAP 20-AG
  • 3/8-24 4 FLUTE TAPER TAP HI-CARBON STEEL
  • 3/8-18 PIPE TAP
  • 3/8-18 PIPE TAP HIGH SPEED STEEL
  • 7/16-14 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 7/16-14 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 7/16-14 3 FLUTE SPIRAL PT PLUG TAP 20-AG
  • 7/16-20 SPIRAL FLUTED TAP 52 DEG. PLUG
  • 7/16-14 4 FLUTE TAPER TAP HI-CARBON ST.
  • 7/16-20 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 7/16-20 3-FLUTE SPIRAL PT PLUG TAP 20-AG
  • 7/16-20 4 FLUTE TAPER TAP HI-CARBON ST.
  • 1/2-13 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 1/2-13 4 FLUTE BOTTOM TAP 25-AG
  • 1/2-13 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 1/2-13 3-FLUTE SPIRAL PT. PLUG TAP 20-AG
  • 1/2-13 4 FLUTE TAPER TAP HI-CARBON STEEL
  • 1/2-13 4 FLUTE TAPER TAP 23-AG
  • 1/2-20 4 FLUTE BOTTOM TAP HI-CARBON ST.
  • 1/2-20 4 FLUTE PLUG TAP HI-CARBON STEEL
  • 1/2-20 3-FLUTE SPIRAL PT. PLUG TAP 20-AG
  • 1/2-20 4 FLUTE TAPER TAP HI-CARBON STEEL
  • 1/2-14 PIPE TAP
  • 1/2 PIPE TAP HIGH SPEED STEEL
  • 9/16-12 BOTTOM TAP
  • 9/16-12 PLUG TAP
  • 9/16-12 SPIRAL PT PLUG TAP
  • 9/16-12 TAPER TAP
  • 9/16-18 TAPER TAP
  • 9/16-27 PLUG TAP
  • 5/8-11 BOTTOMING TAP
  • 5/8-11 BOTTOMING TAP NITRO HS M-7N STEEL
  • 5/8-11 PLUG TAP
  • 5/8-11 SPIRAL PT. PLUG TAP
  • 5/8-11 TAPER TAP
  • 5/8-18 BOTTOMING TAP
  • 5/8-20 BOTTOMING TAP
  • 5/8-18 BOTTOMING TAP FOR THREAD INSERT
  • 5/8-18 PLUG TAP
  • 5/8-18 SPIRAL PT. PLUG TAP
  • 5/8-18 TAPER TAP
  • 5/8-18 TAPER TAP LEFT HAND THREAD
  • 11/16-11 SPIRAL PT PLUG TAP
  • 11/16-16 SPIRAL PT GUN TAP
  • 3/4-10 BOTTOM TAP 4-FLUTE 4-11/16″ OAL
  • 3/4-10 BOTTOMING TAP M-7 HSS
  • 3/4-10 PLUG TAP
  • 3/4-10 SPIRAL POINT PLUG TAP 3 FL 20-AG
  • 3/4-10 TAPER TAP
  • 3/4-16 BOTTOM TAP 4-FLUTE 4-11/16″ OAL
  • 3/4-16 PLUG TAP FOR THREAD INSERT HSS
  • 3/4-16 TAPER TAP
  • 3/4-16 TAPER TAP LEFT HAND THREAD
  • 3/4-16 TAPER TAP 4-FLUTE 23-LAG
  • 3/4-14 PIPE TAP
  • 3/4 PIPE TAP HIGH SPEED STEEL
  • 7/8-9 BOTTOM TAP 4-FLUTE
  • 7/8-9 BOTTOMING TAP FOR THREAD INSERTS
  • 7/8-9 PLUG TAP FOR THREAD INSERTS
  • 7/8-9 TAPER TAP 4-FLUTE HI-CARBON STEEL
  • 7/8-14 BOTTOM TAP 4-FLUTE
  • 7/8-14 3-FLUTE SPIRAL PT. PLUG TAP 20-AG
  • 15/16-16 BOTTOM TAP
  • 1-5 TANDEM ACME TAP 10-3/4 OAL 5-1/4 TR
  • 1-8 BOTTOMING TAP
  • 1-8 PLUG TAP
  • 1-8 3-FLUTE SPIRAL PT. PLUG TAP
  • 1-8 TAPER TAP 4-FLUTE
  • 1-12 BOTTOM TAP 4 FLUTE
  • 1-12 SPIRAL POINTED TAP 3 FLUTE PLUG
  • 1-14 TAPER TAP 4-FLUTE
  • 1″ PIPE TAP
  • 1″NPT PIPE TAP HIGH SPEED STEEL
  • 1-1/8-7 PLUG TAP
  • 1-1/8-7 TAPER TAP
  • 1-1/8-12 TAPER TAP
  • 1-1/4-7 BOTTOM TAP
  • 1-1/4-7 TAPER TAP 4 FLUTE
  • 1-1/4-12 PLUG TAP HIGH SPEED M-7 STEEL
  • 1-1/4″ PIPE TAP
  • 1-3/8-8 BOTTOMING TAP
  • 1-3/8-6 BOTTOM TAP
  • 1-3/8-8 TAPER TAP COBALT
  • 1-1/2-6 BOTTOM TAP
  • 1-1/2-6 PLUG TAP HSS
  • 1-1/2-6 TAPPER TAP
  • 1-1/2-6 TAPER TAP HSS
  • 1-1/2-8 TAPER TAP COBALT
  • 1-1/2-12 PLUG TAP FOR THREAD INSERT
  • 1-1/2-12 TAPER TAP HHS 6 FLUTE
  • 1-1/2″ PIPE TAP
  • M2.5x.45 SPIRAL PT 2-FLUTE PLUG TAP
  • 1-9/16-18 SUPER FINE PLUG TAP
  • 1-5/8-8 PLUG TAP
  • 1-3/4-5 PLUG TAP
  • 40 PIECE METRIC TAP DIE SET
  • M3x.50 SPIRAL PT. 2-FLUTE PLUG TAP
  • 2-11-1/2 NPT TAPER PIPE TAP 7 FLUTE
  • M3.5x.60 SPIRAL PT 2-FLUTE PLUG TAP
  • M3.5x.60 BOTTOM TAP 3 FLUTE
  • M3.5x.60 TAPPER TAP 3 FLUTE
  • M3x.50 BOTTOM TAP 3 FLUTE
  • M3x.50 PLUG TAP 3 FLUTE
  • M3x.50 TAPPER TAP 3 FLUTE
  • M4.5x.75 SPIRAL PT 2-FLUTE PLUG TAP
  • M4x.7 THREAD FORMING TAP D7 THREAD LIMIT
  • M4x.70 PLUG TAP 4 FLUTE
  • M4x.70 SPIRAL PT 2-FLUTE PLUG TAP
  • M4x.75 PLUG TAP 4 FLUTE
  • M5x.90 TAPER TAP 4 FLUTE EX-COARSE
  • M5x.80 BOTTOMING TAP 4 FLUTE
  • M5x.80 PLUG TAP 4 FLUTE 2-3/8OAL
  • M5x.80 SPIRAL POINT 2-FLUTE PLUG TAP
  • M5x.80 TAPER TAP 4 FLUTE
  • M6x1.0 SPIRAL POINT 2-FLUTE PLUG TAP
  • M6.3×1.0 SPIRAL PT 2-FLUTE PLUG TAP
  • M6x1.0 BOTT0M TAP 4 FLUTE 2-1/2 OAL
  • M6x1.0 PLUG TAP 4 FLUTE 2-1/2OAL
  • M6x1.0 TAPER TAP 4 FLUTE 2-1/2 OAL
  • M7x1.0 SPIRAL PT 2-FLUTE PLUG TAP
  • M8x1.0 SPIRAL PT 2-FLUTE PLUG TAP
  • M8x1.25 BOTTOMING TAP 4 FLUTE
  • M8x1.25 THREAD FORMING TAP D7 THRD LIMIT
  • M8x1.25 PLUG TAP 4 FLUTE 2-1/2OAL
  • M8x1.25 SPIRAL PT 2-FLUTE PLUG TAP
  • M9x1.25 SPIRAL PT 2-FLUTE PLUG TAP
  • M10x1.00 SPIRAL PT 3-FLUTE PLUG TAP
  • M10x1.25 SPIRAL PT 3-FLUTE PLUG TAP
  • M10x1.50 SPIRAL PT 3-FLUTE PLUG TAP
  • M10x1.25 PLUG TAP 4 FLUTE 2-15/16OAL
  • M10x1.50 BOTTOMING TAP 4 FLUTE HSS
  • M10x1.50 PLUG TAP 4 FLUTE HI-CARBON
  • M11x1.50 SPIRAL PT 3-FLUTE PLUG TAP
  • M12x1.25 SPIRAL PT 3-FLUTE PLUG TAP
  • M12x1.50 BOTTOM TAP HIGH SPEED STEEL
  • M12x1.50 SPIRAL PT 3-FLUTE PLUG TAP
  • M12x1.50 TAPER TAP 4-FLUTE
  • M12x1.50 PLUG TAP 4 FLUTE 3-3/8OAL
  • M12x1.75 BOTTOM TAP
  • M12x1.75 PLUG TAP 4 FLUTE 3-3/8OAL
  • M12x1.75 SPIRAL POINT 3-FLUTE PLUG TAP
  • M12x1.75 TAPER TAP 4 FLUTE M-2 STEEL
  • M14x1.25 SPIRAL PT 3-FLUTE PLUG TAP
  • M14x1.50 SPIRAL PT 3-FLUTE PLUG TAP
  • M14x2.00 SPIRAL PT 3-FLUTE PLUG TAP
  • M14x1.0 PLUG TAP 4 FLUTE
  • M14x1.5 BOTTOM TAP 4 FLUTE
  • M14x1.5 PLUG TAP 4 FLUTE
  • M14x2.0 PLUG TAP 4 FLUTE
  • M16x1.50 PLUG TAP 4 FLUTE
  • M16x1.5 BOTTOM TAP
  • M16x2 BOTTOM TAP HIGH SPEED M-2 STEEL
  • M16x2 PLUG TAP 4 FLUTE 2-1/2OAL
  • M16x2.0 SPIRAL PT. 3-FLUTE PLUG TAP
  • M16x2.0 TAPER TAP 4 FLUTE 2-1/2OAL
  • M18x1.00 PLUG TAP 4 FLUTE HI-CARBON
  • M20x1.50 PLUG TAP 4 FLUTE
  • M20x1.50 TAPER TAP 4 FLUTE
  • M20x2.50 PLUG TAP 4 FLUTE
  • M20x2.5 PLUG TAP SPIRAL FLUTE THR REPAIR
  • M20x2.5 TAPER TAP 4 FLUTE 2-1/2OAL
  • M20x2.5 BOTTOM TAP HIGH SPEED M-2 STEEL
  • M24x3.0 BOTTOM TAP HSS 4-FLUTE
  • M27x3.0 TAPER TAP 4 FLUTE
  • M28.3×16 CONDUIT THREAD TAP
  • M30x3.5 PLUG TAP 4 FLUTE
  • M32x2.0 PLUG TAP 4 FLUTE
  • M33x2.0 PLUG TAP 4 FLUTE
  • M36x4.0 PLUG TAP 4 FLUTE HSS
  • M39x4.0 TAPER TAP
  • M48x1.5 PLUG TAP 6 FLUTE HSS
  • M64x4.0 BOTTOM TAP
  • 1/2-14 NPT 4-FLUTE 3.12″ OAL
  • 3/4-14 NPT 5-FLUTE 3.25″OAL
  • 123 PC. SPIROL PNT. TAP & TAP DRILL ASST
    • BORING BAR/REAMERS

  • 1/2×1/2×1 1/2 BORING BAR
  • 3/8×3/8 ROUND SHANK CAR REAMER
  • 1/2×1/2 ROUND SHANK CAR REAMER
  • 1/2 BRIDGE REAMER #2 MORSE TAPER
  • 9/16X1/2 ROUND SHANK CAR REAMER
  • 19/32 BRIDGE REAMER #2 MORSE TAPER
  • 9/16″ REAMER #2 MORSE TAPER SHANK
  • 5/8×1/2 ROUND SHANK CAR REAMER
  • 5/8″ REAMER #2 MORSE TAPER SHANK
  • 3/4×1/2 ROUND SHANK CAR REAMER
  • 3/4″ REAMER #3 MORSE TAPER SHANK
  • 13/16X1/2 RND SHANK CAR REAMER-3 FLATS
  • 27/32 BRIDGE REAMER #3 MORSE TAPER
  • 7/8×1/2 ROUND SHANK CAR REAMER
  • 7/8 BRIDGE REAMER #3 MORSE TAPER
  • 1×1/2 ROUND SHANK CAR REAMER
  • 1-1/16 CONSTRUCTION REAMER HEX SHANK
  • 1-1/8 BRIDGE REAMER #3 MORSE TAPER
  • 1-1/4″ BRIDGE REAMER MORSE TAPER SHANK
  • 6M STRAIGHT FLUTE MACHINE REAMER
  • 1/64″ GP-BRIGHT DRILL BIT 118′ #100
  • 1/64″ TYPE 190AN DRILL BIT
  • 1/32″ GP-BRIGHT DRILL BIT 118′ #100
  • 1/32″ TYPE 100BN DRILL BIT TIN COATED
  • 3/64″ COBALT DRILL BIT 135′ #150
  • 3/64″ GP-BRIGHT DRILL BIT 118′ #100
  • 1/16″ MAGNUM 190AG DRILL BIT 135′
  • 1/16 TYPE 150 DRILL BIT COBALT 135′
  • 1/16×6 AIRCRAFT EXTENSION DRILL 135′
  • 1/16″ TYPE 190AN DRILL BIT
  • 1/16″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 1/16″ TYPE 190-PT PARABOLIC DRILL BIT
  • 1/16″ MAGNUM 135AG STUBY DRILL BIT 135′
  • 5/64″ TYPE 190AG DRILL BIT 135′
  • 5/64 TYPE 150 DRILL BIT COBALT 135′
  • 5/64 TYPE 190AL DRILL BIT LEFT HAND
  • 5/64 HIGH SPEED JOBBER BIT LEFT HAND
  • 5/64″ TYPE 190AN DRILL BIT
  • 5/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 3/32″ TYPE 190AG DRILL BIT 135′ MAGNUM
  • 3/32″x4/1/4 TYPE 210 TAPER LENGTH DRILL
  • 3/32 TYPE 150 DRILL BIT COBALT 135′
  • 3/32×6 AIRCRAFT EXTENSION DRILL 135′
  • 3/32 TYPE 190AL DRILL BIT LEFT HAND
  • 3/32″ TYPE 190AN DRILL BIT
  • 3/32″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 3/32″ TYPE 190-PT PARABOLIC DRILL TiN
  • 3/32″ VIPER PARABOLIC H/D DRILL 135′ S/P
  • 3/32″ TYPE 135-AG STUBBY DRILL
  • 3/32″ TYPE 135-TN STUBBY DRILL TiN COAT
  • 7/64″ TYPE 190AG DRILL BIT 135′ MAGNUM
  • 7/64″ TYPE 150 DRILL BIT COBALT 135′
  • 7/64″ TYPE 175AG DRILL BIT 135’w/3 FLATS
  • 7/64 HIGH SPEED JOBBER BIT LEFT HAND
  • 7/64 TYPE 190AL DRILL BIT LEFT HAND
  • 7/64″ TYPE 190AN DRILL BIT
  • 7/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 7/64″ STUB DRILL BIT 135′ #135 BLK. HD
  • 7/64″ TYPE 140-G DRILL BIT TWIN END 135′
  • 7/64″ TYPE 140 DRILL BIT TWIN END 135′
  • 1/8″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 1/8″ TYPE 150 DRILL BIT COBALT 135′
  • 1/8×5-1/8″ TYPE 210 DRILL BIT 118′
  • 1/8×6 AIRCRAFT EXTENSION DRILL 135′
  • 1/8″ TYPE 115 DRILL BIT 118′ GEN.PURPOSE
  • 1/8×1/4 HEX SHANK DRILL 135′ SPLIT PT.
  • 1/8×2 3/4″ IMPACT HAMMER DRILL EX HVY
  • 1/8 TYPE 190AL DRILL BIT LEFT HAND
  • 1/8×3 TYPE 215 FAST SPIRAL MASONRY DB
  • 1/8″ TYPE 190AN DRILL BIT
  • 1/8″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 1/8″ TYPE 190-PT PARABOLIC FLUTE TIN
  • 1/8″ TYPE 135AG STUB BIT MAGNUM 135′
  • 1/8″ MAGNUM STUB DRILL BIT 135′ BLACK
  • 1/8″ TYPE 140-G DRILL BIT TWIN END 135
  • 1/8″ TYPE 140 DRILL BIT TWIN END 135′
  • 1/8″ CARBIDE SPADE DRILL BIT
  • 9/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 9/64″ TYPE 150 DRILL BIT COBALT 135′
  • 9/64×6 w/4″ FLUTE EXTRA LENGTH DRILL
  • 9/64″ TYPE 190AL LEFT HAND DRILL BIT
  • 9/64″ TYPE 190AN DRILL BIT
  • 9/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 9/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 5/32″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 5/32″ TYPE 150 COBALT DRILL BIT 135′
  • 5/32×6 AIRCRAFT EXTENSION DRILL 135′
  • 5/32×1/4 HEX SHANK DRILL 135′ SPLIT PT
  • 5/32″ TYPE 609 IMPACT DRILL BIT
  • 5/32×4-1/2 SDS IMPACT DRILL BIT
  • 5/32×5 SDS HEX TAPCON DRILL BIT/DRIVER
  • 5/32×7 SDS HEX TAPCON DRILL BIT/DRIVER
  • 5/32×6 SDS+ HAMMER DRILL 4″ USEABLE
  • 5/32 TYPE 190-AL DRILL BIT LEFT HAND
  • 5/32×3-1/2 TAPCON MASONRY DRILL BIT
  • 5/32×4-1/2 TAPCON MASONRY DRILL BIT
  • 5/32×5-1/2 TAPCON MASONRY DRILL BIT
  • 5/32″ TYPE 190AN DRILL BIT
  • 5/32″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 5/32 TYPE 135AG STUB BIT MAGNUM 135′
  • 11/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 11/64″ TYPE 150 DRILL BIT COBALT 135′
  • 11/64″ TYPE 166 DRILL BIT -6″ LONGBOY
  • 11/64″ TYPE 190AN DRILL BIT
  • 11/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 11/64″ TYPE 190-PT PARABOLIC TiN COATED
  • 11/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 11/64″ TYPE 135TN STUB BIT TiN COATED
  • 3/16″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 3/16″ TYPE 150 DRILL BIT COBALT 135′
  • 3/16×6 AIRCRAFT EXTENSION DRILL 135′
  • 3/16×6 XGT-AG DRILL BIT 135′
  • 3/16″ TYPE 168 DRILL BIT -12″ LONGBOY
  • 3/16×1/4 HEX SHANK DRILL 135′ SPLIT PT.
  • 3/16×4-1/2 SDS+ HAMMER DRILL 2-1/2 USE-
  • 3/16×7 SDS-HEX ROTARY HAMMER DRILL
  • 3/16×6 SDS+ HAMMER DRILL 4″ USABLE
  • 3/16×8 SDS+ HAMMER DRILL 6″ USABLE
  • 3/16×10 SDS+ HAMMER DRILL 8″ USEABLE
  • 3/16×12 SDS+ HAMMER DRILL 10″ USEABLE
  • 3/16×14 SDS+ HAMMER DRILL 12″ USEABLE
  • 3/16×4 SDS+ HAMMER DRILL 2″ USEABLE
  • 3/16 TYPE 190-AL DRILL BIT LEFT HAND
  • 3/16×4″ TYPE 225 DRILL BIT
  • 3/16×3-1/2 TAPCON DRILL BIT CARBIDE TIP
  • 3/16×4-1/2 TAPCON DRILL BIT CARBIDE TIP
  • 3/16×6-1/2 TAPCON DRILL BIT CARBIDE TIP
  • 3/16×7-1/2 TAPCON DRILL BIT CARBIDE TIP
  • 3/16×5-1/2 TAPCON DRILL BIT CARBIDE TIP
  • 3/16×3 TYPE 215 FAST SPIRAL MASONRY DB
  • 3/16×12 SLOW SPIRAL HD MASONARY BIT
  • 3/16″ TYPE 190AN DRILL BIT
  • 3/16″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 3/16×2 PILOT PIN ANNULAR CUT THRU 1/2″
  • 3/16×2 SPRING LOADED ROTALOC PILOT PIN
  • 3/16″ TYPE 135AG STUB BIT MAGNUM 135′
  • 3/16″ STUBY DRILL BIT COBALT 135′
  • 3/16″ TYPE 140-G DRILL BIT TWIN END 135
  • 13/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 13/64″ TYPE 150 DRILL BIT COBALT 135′
  • 13/64″ TYPE 166 DRILL BIT -6″ LONGBOY
  • 13/64″ TYPE 190AN DRILL BIT
  • 13/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 13/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 7/32″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 7/32″ TYPE 150 DRILL BIT COBALT 135′
  • 7/32×6 AIRCRAFT EXTENSION DRILL 135′
  • 7/32×7-1/2 TAP CON DRILL BIT CARBIDE TIP
  • 7/32″ TYPE 190AN DRILL BIT
  • 7/32″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 7/32″ TYPE 135AG STUB BIT MAGNUM 135′
  • 15/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 15/64″ TYPE 150 DRILL BIT COBALT 135′
  • 15/64″ TYPE 190AN DRILL BIT
  • 15/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 1/4″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 1/4″ TYPE 190-AN DRILL BIT 135′ FOR S/S
  • 1/4″ TYPE 150 DRILL BIT COBALT 135′
  • 1/4″ SOLID CARBIDE DRILL BIT
  • 1/4×6 AIRCRAFT EXTENSION DRILL 135′
  • 1/4″ DRILL BIT -10″ LONGBOY 8″ FLUTE
  • 1/4×12 AIRCRAFT EXTENSION DRILL 135′
  • 1/4″ TYPE 168 DRILL BIT -18″ LONGBOY
  • 1/4″ TYPE 175AG DRILL BIT MAGNUM 135′ W/
  • 1/4″x 4″ HOLE SAW PILOT BIT 2 FLATS
  • 1/4×4″ TYPE 609 DRILL BIT
  • 1/4×4 STRIGHT SHANK WEDGE BIT 2-3/4 USE
  • 1/4×6″ IMPACT HAMMER DRILL EX. HVY DUTY
  • 1/4×4 IMPACT HAMMER DRILL A TAPER 2-1/2U
  • 1/4×4 SDS+ HAMMER DRILL 2″ USEABLE
  • 1/4×6 SDS+ HAMMER DRILL 4″ USEABLE
  • 1/4×6 SDS WEDGE-BIT 4″ USEABLE FOR USE
  • 1/4×8 SDS+ HAMMER DRILL 6″ USEABLE
  • 1/4×11 SDS+ HAMMER DRILL 9″ USEABLE
  • 1/4×14 SDS+ HAMMER DRILL 12″ USEABLE
  • 1/4″ TYPE 190AL DRILL BIT LEFT HAND
  • 1/4×4 TYPE 225 MASONRY DRILL BIT
  • 1/4″x6″ TYPE 225 MASONRY DRILL BIT
  • 1/4×18 TYPE 216 MASONARY DRILL BIT
  • 1/4×4 TYPE 215 FAST SPIRAL MASONRY DB
  • 1/4″ TYPE 190AN DRILL BIT
  • 1/4 PARABOLIC BULLET BRILL w/3 FLATS
  • 1/4 PILOT PIN FOR 9/16 AND LARGER
  • 1/4″ TYPE 135AG STUB BIT MAGNUM 135′
  • 1/4″ MAGNUM STUB DRILL BIT 135′ BLACK
  • 1/4×6 SDS HAMMER DRILL BIT
  • 1/4″ TYPE 140 DRILL BIT TWIN END 135′
  • 1/4″x6″ TYPE XGT-AG DRILL BIT
  • 1/4×12 SDS HAMMER DRILL BIT 14″ OAL
  • 1/4″ TYPE XGT-AG DRILL BIT -12″ MAGNUM
  • 17/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 17/64″ TYPE 150 DRILL BIT COBALT 135′
  • 17/64″ TYPE 160 DRILL BIT -12″ LONGBOY
  • 17/64″ TYPE 175AG DRILL BIT MAGNUM 135
  • 17/64″ TYPE 190AN DRILL BIT
  • 17/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 9/32″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 9/32″ TYPE 150 DRILL BIT COBALT 135′
  • 9/32×6 AIRCRAFT EXTENSION DRILL 135′
  • 9/32″ TYPE 168 DRILL BIT -12″ LONGBOY
  • 9/32″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 9/32×4 IMPACT AHMMER DRILL EX. HVY DUTY
  • 9/32″ TYPE 190AN DRILL BIT
  • 9/32″ TYPE 135AG STUBY BIT MAGNUM 135′
  • 9/32″ TYPE XGT-AG DRILL BIT -12″ MAGNUM
  • 19/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 19/64″ TYPE 150 DRILL BIT COBALT 135′
  • 19/64″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 19/64″ TYPE 190AL DRILL BIT LEFT HAND
  • 19/64″ TYPE 190AN DRILL BIT
  • 19/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 5/16″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 5/16″ TYPE 150 DRILL BIT COBALT 135′
  • 5/16″ GLASS/CERAMIC DRILL CARBIDE TIP
  • 5/16×6 AIRCRAFT EXTENSION DRILL 135′
  • 5/16×6-3/8″ TYPE 210 DRILL BIT 118′
  • 5/16″ DRILL BIT -10″ LONGBOY 8″ FLUTE
  • 5/16×12 DRILL BIT 9″ FLUTE LONGBOY
  • 5/16″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 5/16″ SUPER HARD STEEL DRILL CARBIDE TIP
  • 5/16×6 IMPACT HAMMER DRILL EX. HVY DUTY
  • 5/16×4 TYPE 609 DRILL BIT
  • 5/16″ TYPE 190AL DRILL BIT LEFT HAND
  • 5/16×6″ TYPE 225 DRILL BIT
  • 5/16″ TYPE 190AN DRILL BIT
  • 5/16″ TYPE 135AG STUBBY DRILL BIT MAG.
  • 21/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 21/64 TYPE 150 DRILL BIT COBALT 135′
  • 21/64″ TYPE 175AG DRILL BIT MAGNUM 135
  • 21/64″ TYPE 115 DRILL BIT 118′ GENERAL
  • 21/64″ LEFT HAND DRILL BIT 118′
  • 21/64″ TYPE 190AN DRILL BIT
  • 21/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 11/32″ TYPE 190AG DRILL BIT MAGNUM 135
  • 11/32 TYPE 150 DRILL BIT COBALT 135′
  • 11/32×6 AIRCRAFT EXTENSION DRILL 135′
  • 11/32″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 11/32″ TYPE 190AN DRILL BIT
  • 11/32″ TYPE 135AG STUB BIT MAGNUM 135′
  • 23/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 23/64 TYPE 150 DRILL BIT COBALT 135′
  • 23/64″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 23/64″ LEFT HAND DRILL BIT 118′
  • 23/64″ TYPE 190AN DRILL BIT
  • 23/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 3/8″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 3/8″ TYPE 168 DRILL BIT -12″ LONGBOY
  • 3/8″ TYPE 190-AN DRILL BIT 135′ FOR S/S
  • 3/8×24″ TYPE 601 BELL HANGER BIT
  • 3/8″ TYPE 150 DRILL BIT COBALT 135′
  • 3/8″ COUNTER SINK 82 DEGREE 6 FLUTED’
  • 3/8″ TYPE 210 DRILL BIT-6-3/4″ EXTENSION
  • 3/8″ DRILL BIT -10″ LONGBOY 8″ FLUTE
  • 3/8×12 DRILL BIT 9″ FLUTE LONGBOY
  • 3/8×12 AIRCRAFT EXTENSION DRILL 3-5/8 FL
  • 3/8″ TYPE 165 DRILL BIT -18″ EXTENSION
  • 3/8″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 3/8 TYPE 115 DRILL BIT GEN. PURPOSE 118′
  • 3/8×6″ IMPACT HAMMER DRILL EX. HVY DUTY
  • 3/8×6″ SDS IMPACT HAMMER DRILL 4″ FLUTE
  • 3/8×10 SDS+ HAMMER DRILL 8″ USEABLE
  • 3/8×12 SDS+ HAMMER DRILL 10″ USEABLE
  • 3/8×18 SDS+ HAMMER DRILL 16″ USEABLE
  • 3/8×24 SDS+ HAMMER DRILL 22″ USEABLE
  • 3/8×4″ TYPE 609 DRILL BIT
  • 3/8×8″ IMPACT HAMMER DRILL SPLINE w/3
  • 3/8×11″ IMPACT HAMMER DRILL SPLINE
  • 3/8×13″ IMPACT HAMMER DRILL SPLINE
  • 3/8×17″ TYPE 615 DRILL BIT SPLINE
  • 3/8″ TYPE 190AL DRILL BIT LEFT HAND
  • 3/8×6″ TYPE 225 DRILL BIT
  • 3/8×13″ TYPE 214 DRILL BIT HVY DUTY
  • 3/8×6 TYPE 215 FAST SPIRAL MASONRY DB
  • 3/8″ TYPE 190AN DRILL BIT
  • 3/8″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 3/8 PARABOLIC BULLET DRILL w/3 FLATS
  • 3/8×1/4 TYPE 120 RED SHANK GP BRIGHT
  • 3/8″ 135AG STUB DRILL BIT MAGNUM 135′
  • 3/8×12 SDS HAMMER DRILL BIT 10″ FLUTE
  • 3/8″ 260 SCREW MACHINE LENGTH 118′ G.P
  • 3/8×1/4 STUB DRILL BIT HVY. DUTY 135′
  • 3/8×6″ WEDGE BIT HEAVY DUTY STRAIGHT
  • 3/8×13 WEDGE BIT HEAVY DUTY STRAIGHT
  • 25/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 25/64″ TYPE 150 DRILL BIT COBALT 135′
  • 25/64″ TYPE 190AN DRILL BIT
  • 25/64″ TYPE 190AN DRILL BIT 118′
  • 25/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 13/32″ TYPE 190AG DRILL BIT MAGNUM 135
  • 13/32″ TYPE 150 COBALT DRILL BIT 135′
  • 13/32″x3/8″ SHANK COBALT DRILL BIT 135
  • 13/32″ TYPE 115 DRILL BIT 118′ GENERAL
  • 13/32″ TYPE 190AN DRILL BIT
  • 13/32″ TYPE 135AG STUBY BIT MAGNUM 135
  • 27/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 27/64″ TYPE 150 DRILL BIT COBALT 135′
  • 27/64″ EXTRA LONG DRILL BIT
  • 27/64″ TYPE 190AN DRILL BIT
  • 27/64″ TYPE 190-P PARABOLIC FLUTE DRILL
  • 27/64×1/4 DRILL BIT NITRO 135′
  • 7/16″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 7/16×2 TYPE 15L ANNULAR CUTTER
  • 7/16 TYPE 150 DRILL BIT COBALT 135′
  • 7/16×3/8×5/32 STR SH. COUNTERBORE CARB
  • 7/16×3/8×5/32 w/#1 MT COUNTERBORE CARB
  • 7/16×6 AIRCRAFT EXTENSION DRILL 135′
  • 7/16″ TYPE 160 DRILL BIT -12″ LONGBOY
  • 7/16 TYPE 190AL DRILL BIT LEFT HAND
  • 7/16″ TYPE 190AN DRILL BIT
  • 7/16×3/8 TYPE 128-AG DRILL MAGNUM 135′
  • 7/16″ TYPE 135AG STUBY BIT MAGNUM 135′
  • 7/16×1 SLUGGER CUTTER BIT
  • 29/64″ TYPE 190AG DRILL BIT MAGNUM 135
  • 29/64 TYPE 150 DRILL BIT COBALT 135′
  • 29/64″ LEFT HAND DRILL BIT 118′
  • 29/64″ TYPE 190AN DRILL BIT
  • 15/32″ TYPE 190AG DRILL BIT MAGNUM 135
  • 15/32 TYPE 150 DRILL BIT COBALT 135′
  • 15/32″ LEFT HAND DRILL BIT 118′
  • 15/32″ TYPE 190AN DRILL BIT
  • 15/32″ TYPE 135AG STUB BIT MAGNUM 135′
  • 31/64″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 31/64 TYPE 150 DRILL BIT COBALT 135′
  • 31/64″ TYPE 190AN DRILL BIT
  • 31/64″ TYPE 135AG STUB BIT MAGNUM 135′
  • 1/2″ TYPE 190AG DRILL BIT MAGNUM 135′
  • 1/2 DRILL BIT #2 MORSE TAPER
  • 1/2″x3/8″SHANK DRILL BIT COBALT 12″ OAL
  • 1/2×3/4 ROTALOK ANNULAR CUTTER SPECIAL
  • 1/2″ TYPE 190-AN DRILL BIT 135′ FOR S/S
  • 1/2″ TYPE 150 DRILL BIT COBALT 135′
  • 1/2×6 CARBIDE TIPPED DRILL HSS 118′
  • 1/2″x3/8″SHANK DRILL BIT COBALT 6″ OAL
  • 1/2×6 AIRCRAFT EXTENSION DRILL 135′
  • 1/2×12 DRILL BIT 4-1/2″ FLUTE AIRCRAFT
  • 1/2×12 DRILL BIT 4-1/2″FL AIRCRAFT COBAL
  • 1/2″ TYPE 160 DRILL BIT -12″ LONGBOY
  • 1/2″ TYPE 175AG DRILL BIT MAGNUM 135′
  • 1/2 ” SUPER HARD STEEL DRILL CARBIDE TIP
  • 1/2×6 TYPE 607 IMPACT HAMMER DRILL A TAP
  • 1/2×6″ TYPE 606 IMPACT HAMMER DRILL SDS
  • 1/2×18″ TYPE 606 IMPACT HAMMER DRILL SDS
  • 1/2×21-1/2 OAL SDS-MAX CARBIDE DRILL 16-
  • 1/2×6 OAL SDS-PLUS CARBIDE DRILL BIT
  • 1/2″X1/4 TYPE 609 DRILL BIT -6″ IMPACT
  • 1/2×3/8 TYPE 609 DRILL BIT -6″ IMPACT
  • 1/2″ TYPE 190AL DRILL BIT LEFT HAND
  • 1/2×13 OAL MASONRY BIT
  • 1/2×6″ OAL MASONRY BIT 1/2″ SHANK
  • 1/2×13″OAL SPLINE BIT IMPACT MASONRY
  • 1/2×18″ SPLINE BIT IMPACT MASONRY 23″OAL
  • 1/2×3/8×6 OAL TYPE 225 MASONRY DRILL
  • 1/2″ TYPE 190AN DRILL BIT
  • 1/2″ TYPE 190-PT PARABOLIC DRILL BIT
  • 1/2×3/8 TYPE 128AG DRILL BIT MAGNUM 135′
  • 1/2″x3/8″SHANK DRILL BIT 118 DEGREE
  • 1/2×12″ TYPE 612 REBAR CUTTER BITSAVER
  • 1/2×3/8 PILOT PT. w/3 FLATS
  • 1/2″ TYPE 128 DRILL BIT
  • 1/2″ TYPE 135AG STUB BIT MAGNUM 135′
  • 1/2×6 SDS HAMMER DRILL BIT
  • 1/2×10 SDS HAMMER DRILL BIT 12″ OAL
  • 1/2×12 SDS HAMMER DRILL BIT 14″ OAL
  • 1/2×8″ SDS HAMMER DRILL BIT 10″ OAL
  • 1/2×8 SDS-MAX MASONRY DRILL BIT 14″ OAL
  • 1/2×12 SDS-MAX MASONRY DRILL BIT 18″ OAL
  • 1/2″x1/4″ TYPE 125 STUB DRILL BIT 135′
  • 1/2×6″ SDS WEDGE BIT 4″ USABLE FOR POWER
  • 1/2×10″SDS WEDGE BIT 8″ USABLE FOR POWER
  • 1/2″ PADDLE BIT 6″ OVERALL LENGHT
  • 33/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 17/32×3/8 H-D HSS DRILL BIT 135′
  • 17/32×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 35/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 9/16 DRILL BIT #2 MORSE TAPER
  • 9/16×18″ OAL WOOD AUGER DRILL BIT
  • 9/16×2 ANNULAR CUTTER BIT
  • 9/16×3/4″ ROTALOK ANNULAR CUTTER SPECIAL
  • 9/16×12 EXTRA LONG DRILL BIT
  • 9/16×4 HIGH SPEED DRILL BIT GP 118′
  • 9/16×12 SDS+ HAMMER DRILL 8″ USABLE
  • 9/16×1/2 COBALT M-42 DRILL BIT
  • 9/16×12 REBAR CUTTER NON REMOVABLE SHANK
  • 9/16×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 9/16×6 w/3/8 SHANK MASONRY DRILL 3-3/8FL
  • 9/16×10 SDS HAMMER DRILL 8″ DRILL LENGTH
  • 9/16×12 SDS HAMMER DRILL 8″ DRILL LENGTH
  • 9/16×1 SLUGGER CUTTER BIT
  • 9/16 PADDLE BIT
  • 37/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 19/32×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 39/64×1/2 COBALT M-42 DRILL BIT
  • 39/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 5/8 DRILL BIT #2 MORSE TAPER
  • 5/8×1/2 TYPE 160 XTRA LONG 12″ 160′ BIT
  • 5/8×2 TYPE 15L ANNULAR CUTTER
  • 5/8×3/4″ ROTALOK ANNULAR CUTTER SPECIAL
  • 5/8×1/2 COBALT M-42 DRILL BIT
  • 5/8×18 SDS+ HAMMER DRILL 16″ FLUTE
  • 5/8×9″ TYPE 609 DRILL BIT
  • 5/8×13″ DRILL BIT SPLINE 8″ DRILL DEPTH
  • 5/8x6x1/2 TP 214 CARB. MASONARY DRILL
  • 5/8×12″ REBAR CUTTER BIT 11″ USABLE
  • 5/8×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 5/8×12″ BOOSTER SDS (REBAR EATER) 10″
  • 5/8×6-1/4 SDS+ HAMMER DRILL 4″ FLUTE
  • 5/8×12 SDS+ HAMMER DRILL 9″ FLUTE
  • 5/8×8 SDS HAMMER DRILL BIT 6″ DRILL DEBT
  • 5/8×12 SDS-MAX MASONRY DRILL BIT 18″ OAL
  • 5/8×21 SDS-MAX DRILL BIT 16″ USABLE
  • 5/8×1 SLUGGER CUTTER BIT
  • 5/8″ PADDLE BIT 6″ OVERALL LENGHT
  • 41/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 21/32×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 43/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 11/16 DRILL BIT #2 MORSE TAPER
  • 11/16 DRILL BIT #3 MORSE TAPER
  • 11/16 TYPE 15L ANNULAR CUTTER
  • 11/16×2 ANNULAR CUTTER BIT
  • 11/16×12″ DRILL BIT 9″ FLUTE LONGBOY
  • 11/16×1/2 COBALT M-42 DRILL BIT
  • 11/16×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 11/16×12 SDS HAMMER DRILL BIT 10″USEABLE
  • 11/16×1 SLUGGER CUTTER BIT
  • 45/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 23/32×1/2 COBALT DRILL BIT 118′
  • 23/32×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 47/64×1/2 TYPE 130AG DRILL BIT S&D 135′
  • 3/4 DRILL BIT #2 MORSE TAPER
  • 3/4×2 ANNULAR CUTTER SHEFFIELD STEEL
  • 3/4×2 TYPE 15L ANNULAR CUTTER
  • 3/4×7/16 HEX AUGER BIT 17″ OVERALL 12″
  • 3/4×3/4″ CUTTING DEPTH ROTALOK ANNULAR
  • 3/4×18 SDS-PLUS DRILL BIT 16″ USABLE
  • 3/4×6″ TYPE 609 DRILL BIT
  • 3/4X13″ OAL SPLINE-DRIVE HAMMER DRILL 8
  • 3/4×16″ OAL SPLINE-DR. HAMMER DRILL 11″
  • 3/4X22″OAL SPLINE-DRIVE HAMMER DRILL 18
  • 3/4″x12″ TYPE 216 MASONRY DRILL BIT
  • 3/4×1/2 COBALT DRILL BIT 118′
  • 3/4×12″ REBAR CUTTER NON REMOVABLE SHANK
  • 3/4×1/2 COBALT DRILL BIT 135′ w/3 FLATS
  • 3/4×1/2 TYPE 130 DRILL BIT S&D 135′
  • 3/4×12 SDS HAMMER DRILL BIT 10″ USABLE
  • 3/4×8 SDS HAMMER DRILL BIT
  • 3/4″ PADDLE BIT 6″ OVERALL LENGHT
  • 49/64″ TYPE 130AG DRILL BIT
  • 25/32×1/2 HSS DRILL BIT
  • 25/32×1/2 TYPE 130AG BRILL BIT
  • 51/64 DRILL BIT #3 MORSE TAPER
  • 51/64×1/2 TYPE 130AG BRILL BIT
  • 13/16 DRILL BIT #2 MORSE TAPER
  • 13/16 DRILL BIT #3 MORSE TAPER
  • 13/16×2 ANNULAR CUTTER
  • 13/16×8 SDS-PLUS DRILL BIT 6″ USEABLE
  • 13/16×1/2 COBALT M-42 DRILL BIT
  • 13/16×1/2 TYPE 130AG DRILL BIT 135′
  • 13/16×1 SLUGGER CUTTER BIT
  • 53/64×1/2 COBALT M-42 DRILL BIT
  • 53/64×1/2 TYPE 130AG DRILL BIT
  • 53/64×1/2 TYPE 130AG DRILL BIT w/3 FLATS
  • 27/32×1/2 TYPE 130AG DRILL BIT
  • 55/64×1/2 TYPE 130AG DRILL BIT
  • 7/8 DRILL BIT #2 MORSE TAPER
  • 7/8 DRILL BIT #3 MORSE TAPER
  • 7/8×2 TYPE 15L ANNULAR CUTTER
  • 7/8×7/16 HEX AUGER BIT 17″ OVERALL 12″
  • 7/8×3/4″ CUTTING DEPTH ROTALOK ANNULAR
  • 7/8×8 OAL SDS-PLUS CARBIDE DRILL BIT
  • 7/8×10 SDS-PLUS HAMMER DRILL 8″ FLUTE
  • 7/8×12 SDS-PLUS HAMMER DRILL 10″ USABLE
  • 7/8×18 SDS-PLUS HAMMER DRILL 16″ USABLE
  • 7/8×36 SDS-PLUS HAMMER DRILL 31″ USABLE
  • 7/8×1/2×12 IG STR. SHANK HAMMER DRILL w/
  • 7/8×16″ OAL SPLINE-DRIVE HAMMER DRILL
  • 7/8×16″ OAL SPLINE-DRIVE TRI-CUTTER HAM-
  • 7/8×17″ OAL TYPE 615 DRILL BIT SPLINE
  • 7/8×11 OAL MASONRY BIT
  • 7/8×12″ TYPE 612 REBAR CUTTER BITSAVER
  • 7/8×1/2 TYPE 130AG DRILL BIT
  • 7/8″ PADDLE BIT
  • 57/64×1/2 TYPE 130AG DRILL BIT
  • 29/32×1/2 TYPE 130AG DRILL BIT
  • 59/64 DRILL BIT #3 MORSE TAPER
  • 59/64×1/2 TYPE 130AG DRILL BIT
  • 15/16×1/2 TYPE 130AG DRILL BIT
  • 15/16″x2 SLUGGER DRILL BIT 3/4″ SHANK
  • 15/16×1 SLUGGER CUTTER BIT
  • 61/64×1/2 TYPE 130AG DRILL BIT
  • 31/32 DRILL BIT #3 MORSE TAPER
  • 31/32×1/2 TYPE 130AG DRILL BIT
  • 63/64×1/2 TYPE 130AG DRILL BIT
  • 63/64×1/2 COBALT DRILL BIT
  • 1″ DRILL BIT #2 MORSE TAPER 6 1/4″ FLUTE
  • 1″ DRILL BIT #3 MORSE TAPER
  • 1″ DRILL BIT #4 MORSE TAPER
  • 1″x7/16″ HEX AUGER BIT 18″ OVERALL 12″
  • 1×21-1/4 OAL SDS-MAX CARBIDE DRILL 16-
  • 1×8 SDS-PLUS HAMMER DRILL 6″ FLUTE
  • 1×10 SDS-PLUS HAMMER DRILL 8″ FLUTE
  • 1×12 SDS-PLUS HAMMER DRILL 10″ FLUTE
  • 1×18 SDS-PLUS HAMMER DRILL 16″ FLUTE
  • 1×18 w/7/16 HEX HAMMER DRILL 12″ FLUTE
  • 1×14 SPLINE-DRIVE HAMMER DRILL 8″ FLUTE
  • 1×16″ OAL SPLINE-DRIVE HAMMER DRILL 11″
  • 1×16″ OAL SPLINE-DRIVE Y-CUTTER HAMMER
  • 1×18″ OAL SPLINE-DRIVE HAMMER DRILL 12″
  • 1×36″ OAL SPLINE-DRIVE HAMMER DRILL 31″
  • 1×12″ STRAIGHT SHANK MASONRY BRILL BIT
  • 1×12″ REBAR CUTTER NON REMOVABLE SHANK
  • 1×12″ TYPE 612 REBAR CUTTER BITSAVER
  • 1×1/2 TYPE 130AG DRILL BIT
  • 1×1/2 COBALT DRILL BIT 118′
  • 1×2 SLUGGER DRILL BIT
  • 1×1/4 ADJ. C-BORE 5A WOOD 2″ OAL
  • 1×5/16 ADJ. C-BORE 5A WOOD 2″ OAL
  • 1″ PADDLE BIT 6″ OVERALL LENGHT
  • 1-1/32″ TYPE 130AG DRILL BIT
  • 1-1/16×1/2 TYPE 130AG BRILL BIT S&D
  • 1-1/16×1/2 DRILL BIT M-42 COBALT
  • 1-5/64″ TYPE 130 DRILL BIT 118′
  • 1-3/32″ TYPE 130AG DRILL BIT
  • 1-7/64″ TYPE 130 DRILL BIT
  • 1-1/8 DRILL BIT #4 MORSE TAPER
  • 1-1/8×23″ TYPE 606 IMPACT HAMMER DRILL
  • 1-1/8×13 SDS-MAX HAMMER DRILL 8″ FLUTE
  • 1-1/8×22-1/2 OAL SDS-MAX CARBIDE DRILL
  • 1-1/8×18 SDS+ HAMMER DRILL 16″ FLUTE
  • 1-1/8″x1/2″ SHANK DRILL BIT COBALT S/P
  • 1-1/8×12 SDS-PLUS REBAR CUTTER BIT 10″
  • 1-1/8″ TYPE 130AG DRILL BIT
  • 1-1/8×2 SLUGGER DRILL BIT
  • 1-1/8×1 SLUGGER CUTTER BIT
  • 1-1/8″ PADDLE BIT 6″ OVERALL LENGHT
  • 1-5/32″ TYPE 130AG DRILL BIT
  • 1-3/16″ TYPE 130AG DRILL BIT
  • 1-7/32 DRILL BIT #4 MORSE TAPER
  • 1-7/32″ TYPE 130AG DRILL BIT
  • 1-1/4 DRILL BIT #4 MORSE TAPER
  • 1-1/4×23″ TYPE 606 SDS HAMMER DRILL
  • 1-1/4×16″ SPLINE SHANK HAMMER DRILL 11″
  • 1-1/4″ TYPE 130AG DRILL BIT
  • 1-1/4×2 SLUGGER DRILL BIT
  • 1-1/4 WOOD BORING BIT 2 EDGE SELF FEED
  • 1-1/4×6 PADDLE BIT
  • 1-17/64 DRILL BIT #4 MORSE TAPER
  • 1-17/64 DRILL BIT 1/2″ ROUND SHANK
  • 1-9/32″ TYPE 130AG DRILL BIT
  • 1-5/16″ TYPE 130AG DRILL BIT
  • 1-3/8″ TYPE 130AG DRILL BIT
  • 1-3/8×6 PADDLE BIT
  • 1-7/16″ TYPE 130AG DRILL BIT
  • 1-1/2 DRILL BIT #4 MORSE TAPER
  • 1-1/2×23″ TYPE 616 DRILL BIT SPLINE
  • 1-1/2×3/4 SHANK DRILL BIT 118′ HSS
  • 1-1/2″ TYPE 130AG DRILL BIT
  • 1-1/2 WOOD BORING BIT 2 EDGE SELF-FEED
  • 1-1/2 MULTI EDGE AUTOMATIC FEED WOOD BIT
  • 1-1/2×1/2 MULTI SPUR C-BORE WOOD 1-1/2″
  • 1-1/2×6 PADDLE BIT
  • 1-17/32 DRILL BIT #4 MORSE TAPER
  • 1-17/32 DRILL BIT #5 MORSE TAPER
  • 1-5/8×1 SLUGGER CUTTER BIT
  • 1-3/4 WOOD BORING BIT 2 EDGE SELF-FEED
  • 1-3/4 DRILL BIT #4 MORSE TAPER
  • 1-3/4×1 SLUGGER CUTTER BIT
  • 1-25/32 DRILL BIT #4 MORSE TAPER
  • 1-7/8 DRILL BIT #4 MORSE TAPER
  • 2″ DRILL BIT #4 MORSE TAPER
  • 2×6 PRECUSSION CORE DRILL CARBIDE TIPPED
  • 2×1 SLUGGER CUTTER BIT
  • 2 WOOD BORING BIT 2 EDGE SELF-FEED
  • 2×1/2 MULTI SPUR C-BORE WOOD 1-1/2″ OAL
  • 2-1/16″ DRILL BIT #4 MORSE TAPER
  • 2-1/2 CORE BIT ONE PIECE SPLINE
  • #48-66-3160 CHUCK KEY 3/8 PILOT HOLE FOR
  • WOOD BORING KIT
  • WOOD BORING BIT PILOT SCREW FOR ALL SIZE
  • DRILL BIT SET 1/16 TO 1/2 BY 64THS
    • DRILL BUSHING
  • M4x7x8 TYPE “HM” DRILL BUSHING METRIC
  • 3/32×13/64×1/4″ TYPE “H” DRILL BUSHING
  • .0995×1/4×1/4 TYPE “H” DRILL BUSHING
  • 1/8×5/16×1/4″ TYPE “H” DRILL BUSHING
  • 1/8×5/16×1/4″ TYPE “P” DRILL BUSHING
  • 5/32×5/16×3/8″ TYPE “H” DRILL BUSHING
  • 5/32×5/16×1/2″ TYPE “H” DRILL BUSHING
  • 3/16×13/32×1/4″ TYPE “H” DRILL BUSHING
  • 13/64×13/32×1/4 TYPE “H” DRILL BUSHING
  • 7/32×13/32×1/4″ TYPE “H” DRILL BUSHING
  • 7/32×13/32×1/2″ TYPE “H” DRILL BUSHING
  • .250×13/32×1″ TYPE “P” DRILL BUSHING
  • 9/32×1/2×1/4″ TYPE “H” DRILL BUSHING
  • 11/32×1/2×1/2 “SF” DRILL JIG BUSHING
  • 15/32×3/4×1/2 TYPE “SF” RENEWABLE DRILL
  • 3/4x1x5/8 TYPE “P” DRILL JIG BUSHING
  • 49/64x1x1/2 “H” DRILL JIG BUSHING
  • 15/16×1-3/8×1-1/2 “H” DRILL JIG BUSHING
  • 3/16×5/16×3/4 “P” DRILL JIG BUSHING
    • DRILL ROD
  • 3/32×3′ DRILL ROD PLAIN OIL HARDENED
  • 1/8×3′ DRILL ROD PLAIN OIL HARDENED
  • 1/8×3′ DRILL ROD PLAIN WATER HARDENED
  • 5/32×3-1/8 JOBBER LENGTH DRILL BLANK
  • 5/32×3′ DRILL ROD PLAIN OIL HARDENED
  • 5/32×3′ DRILL ROD PLAIN WATER HARDENED
  • 3/16×3′ DRILL ROD PLAIN OIL HARDENED
  • 1/4×3′ DRILL ROD OIL HARDENED
  • 1/4×1′ DRILL ROD OIL HARDENED
  • 19/64×3′ DRILL ROD OIL HARDENED
  • 5/16×3′ DRILL ROD PLAIN OIL HARDENED
  • 3/8×3′ DRILL ROD PLAIN AIR HARDENED
  • 3/8×3′ DRILL ROD PLAIN OIL HARDENED
  • 1/2×3′ DRILL ROD PLAIN OIL HARDENED
  • 5/8×3′ DRILL ROD PLAIN OIL HARDENED
  • 3/4×3′ DRILL ROD PLAIN OIL HARDENED
  • 3/4×7.375 O-1 DRILL ROD HARDENED TO :
  • 3/4×3′ DRILL ROD PLAIN WATER HARDENED
    • HOLE SAW
  • 9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6-5/8″ 2-PIECE VARIABLE PITCH HOLE SAW
  • 5/8″ STARRETT VARIABLE PITCH HOLE SAW
  • 11/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6-7/8″ GREENLEE CANLIGHT HOLE SAW
  • 3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 13/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 7/8″ CARBIDE HOLE SAW
  • 15/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 3/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-5/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1-3/8″ AUTOMATIC FEED WOOD BIT HOLE SAW
  • 1 7/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 11/16″ BI-METAL VARIABLE PITCH HOLE SW
  • 1 3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1 13/16″ BI-METAL VARIABLE PITCH HOLE SW
  • 1-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2″ CARBIDE TOOTH HOLE SAW
  • 2-1/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-5/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-1/2″ CARBIDE TOOTH HOLE SAW
  • 2-9/16″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 2-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-3/8″ BI-METAL VARIALBE PITCH HOLE SAW
  • 3-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-1/2″ CARBIDE TOOTH HOLE SAW
  • 3-5/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-5/8″ CARBIDE TOOTH HOLE SAW
  • 3-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 3-7/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4″ CARBIDE TIPPED HOLE SAW
  • 4-1/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/8″ MAGNA VARIABLE PITCH HOLE SAW BI-
  • 4-1/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-3/8″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 4-1/2″ CARBIDE TIPPED HOLE SAW
  • 4-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5-1/2″ BI-METAL VARIABLE PITCH HOLE SAW
  • 5-3/4″ BI-METAL VARIABLE PITCH HOLE SAW
  • 6″ BI-METAL VARIABLE PITCH HOLE SAW
  • 1/2″ HEX-HOLE SAW ARBOR FOR 9/16×1-3/16
  • 1/2″ HEX-HOLE SAW ARBOR FOR 1-1/4 THR 6
  • 1/4″ ROUND HOLE SAW ARBOR FOR 9/16x
  • 3/8″ HEX-HOLE SAW ARBOR FOR 9/16//1-1/4″
  • 3/8″ HEX-HOLE SAW ARBOR FOR 1-1/4×6
  • 3/8″ QUIKIJEX SAW ARBOR FOR 1-1/4×6
  • 1/2″ HEX-HOLE SAW ARBOR FOR 9/16×1-3/16
  • 1/2″ HEX-HOLE SAW ARBOR FOR 1-1/4 THR 6
  • 1/4″ ROUND HOLE SAW ARBOR FOR 9/16x
  • 3/8″ HEX-HOLE SAW ARBOR FOR 9/16//1-1/4″
  • 3/8″ HEX-HOLE SAW ARBOR FOR 1-1/4×6
  • 3/8″ QUIKIJEX SAW ARBOR FOR 1-1/4×6
  • ARBOR ADAPTOR
  • 3/8″ HEX-HOLE SAW HIGH SPEED PILOT DRILL
  • 7/16″ HEX-HOLE SAW HIGH SPEED PILOT DRIL
  • EXTRA PILOT DRILLS
  • 1/4″ SHORT PILOT BIT FOR 5L,6L ARBORS
  • 7/16×12 HEX-HOLE SAW MANDREL EXTENSION
  • HOLE SAW KIT 7 SIZES 7/8″-2-1/8″ w/CASE
  • HOLE SAW KIT SIZES 7/8 to 2-1/2″ w/CASE
  • ARBORED HOLE SAW KIT 5 SIZES 7/8″-1-1/2″
  • ELECTRICIAN HOLE SAW KIT 7/8″ TO 2 1/2″
  • 1200L DELUXE HOLE SAW KIT 12 SIZES
  • HOLE SAW KIT 10 SIZES 7/8″-4-3/4″ w/CASE
  • HOLE SAW KIT 16 SIZES 3/4″-4-3/4″ w/CASE
  • HOLE SAW KIT SIZES 7/8″-2-1/2″ w/CASE
  • HOLE SAW KIT SIZES 3/4″-2-1/4″ w/CASE
    • SCREW EXTRACTOR
  • #1 TO #3 MORSE TAPER SLEEVE WITH HARDEN
  • #2 TO #3 MORSE TAPER SLEEVE WITH HARDEN
  • #3 TO #2 MORSE TAPER SLEEVE WITH HARDEN
  • #1 SCREW EXTRACTOR 3/32 TO 5/32
  • #2 SCREW EXTRACTOR 5/32 TO 7/32
  • #3 SCREW EXTRACTOR 7/32 TO 9/32
  • #4 SCREW EXTRACTOR 9/32 TO 3/8
  • #5 SCREW EXTRACTOR 3/8 TO 5/8
  • #6 SCREW EXTRACTOR 5/8 TO 7/8
  • #7 SCREW EXTRACTOR 7/8 TO 1 1/8
  • 1 THRU 5 SCREW EXTRACTORS W/190AL DRILLS
  • 1/8″ THRU 13/32 ” SCREW EXTRACTOR 5 PC.
  • EX-1,2,3,4,& 5 TYPE 420 EXTRACTOR SET
  • 1/8″ THRU 13/32 ” SCREW EXTRACTOR 10 PC
  • 1/8″ THRU 7/8″ SCREW EXTRACTOR 25 PC SET
  • 3/16 LETTER C WEDGE-PRUF EXTRACTOR
  • 5/16 LETTER G WEDGE-PRUF EXTRACTOR
  • 17/32 LETTER N WEDGE-PRUF EXTRACTOR
    • BANDING
  • 1/2 STEEL BANDING CLIP
  • 1/2 STEEL BANDING SEAL FOR POLYESTER
  • 1/2″ POLYPROPYLENE BANDING 7200′ REEL
  • 1/2″ POLYETHELENE BANDING 9000′ REEL
  • 1/2 STEEL BANDING COIL
  • 3/4 STEEL BANDING CLIP
  • 3/4 STAINLESS STEEL BANDING CLIP
  • 3/4x.023 STEEL BAND
  • 3/4x.020 STEEL BANDING 1760 LBS
  • 3/4 STAINLESS STEEL BANDING
  • BAND CUTTER HVY DUTY UP TO 2″ BAND .050
    • BIT TIPS, TORX, PHILLIPS, ETC

  • 3/16×3/8 DRIVE SOCKET W/HEX BIT
  • 3/4″x1-1/2×1/2 SQ DRIVE IMPACT SOCKET ST
  • 3/4″x1/2 SQ DRIVE DEEP IMPACT SOCKET ST
  • 7/8″x1/2 SQ DRIVE IMPACT SOCKET STD 6-PT
  • 15/16″x1-1/2×1/2 SQ DR IMPACT SOCKET
  • 1/4×7/8×1/4 SQ. DRIVE SOCKET TAPERED
  • 1/4×1-1/4×3/8 SQ DRIVE SOCKET TAPERED
  • 3/8×1-1/4×1/2 SQ DRIVE SOCKET STRAIGHT
  • 3/16×1-1/4×3/8 SQ DRIVE SOCKET STRAIGHT
  • 9/16×1-1/2×1/2 SQ DRIVE SOCKET STRAIGHT
  • 5/32x1x1/4 HEX PIN BIT TAMPER PROOF 1/4″
  • 1/4×7/8×1/4 SQR DRIVE SOCKET STR. MAG.
  • 1/4×1-1/4×3/8 SQUARE DR. MAG. SOCKET
  • 1/4×1-1/2×1/2 SQUARE DR. MAG. SOCKET
  • 5/16×1-1/2×1/2 SQUARE DR. MAG. SOCKET
  • #10×1/4 HEX SPANNER BIT
  • 1/4×1/4 HEX DRIVE SPANNER BIT TR
  • #8×1/4×1-1/2 HEX SPANNER BIT TR
  • 14-16×1-1/2×1/4 SLOT .055x.359 BLADE MH
  • #0x1x1/4 PHILLIPS BIT MH
  • #3x1x1/4 SHANK PHILLIPS BIT MED. HARD
  • #2Rx1x1/4 SHANK PHILLIPS BIT MED. HARD
  • #2×1-15/16×1/4 SH. PHILLIPS BIT MED HARD
  • #3×1-15/16×1/4 PHILLIPS BIT MH
  • 5-6×1-15/16×1/4SLOT .036x.215 BLADE MH
  • 8-10×1-15/16×1/4 SH. .042x.275 SLOT BIT
  • 12-14×1-15/16×1/4 SH. .050x.360 SLOT BIT
  • 1/4×2-7/8×1/4 HEX BIT HOLDER MAG. QUICK
  • 1/4x2x1/4 HEX BIT HOLDER MAG. QUICK
  • 4-5×1-1/2×1/4 HEX DR. .034x.187 SLOT BIT
  • 6-8×1-1/2×1/4 SH. .040x.250 SLOT BIT
  • 8-10×1-1/2×1/4 SH. .042x.281 SLOT BIT
  • 10-12×1-1/2×1/4 SH. .046x.281 SLOT BIT
  • 12-14×1-1/2×1/4 SH. .050x.284 SLOT BIT
  • #1x1x1/4 SHANK PHILLIPS BIT EX. HARD
  • #2x1x1/4 SHANK PHILLIPS BIT EX. HARD
  • #3x1x1/4 SHANK PHILLIPS BIT EX. HARD
  • #2Rx1x1/4 SHANK PHILLIPS BIT EX. HARD
  • 5/64x1x1/4 SOCKET HEAD INSERT BIT
  • 3/32x1x1/4 ALLEN HD INSERT EX. HARD
  • 5/32x1x1/4 ALLEN HD. INSERT EX. HARD
  • 3/16x1x1/4 ALLEN HD. INSERT EX. HARD
  • 7/32x1x1/4 SHANK ALLEN HEAD BIT EX. HARD
  • 4-5×1-1/2×1/4 SH SLOT .034x.187 BLADE
  • 6-8×1-1/2×1/4 SH SLOT .040x.250 BLADE
  • 12-14×1-1/2×5/16 SH. SLOT BIT .050x.359
  • 14-16×1-1/2×5/16 SH. SLOT BIT .055x.359
  • #3×1-1/4×5/16 SH. PHILLIPS BIT EX. HARD
  • #4×1-1/4×5/16 SH. PHILLIPS BIT EX. HARD
  • #1×1-15/16×1/4 SHANK PHILLIPS BIT EX. HD
  • #2×1-15/16×1/4 SH. PHILLIPS BIT EX. HARD
  • #3×1-15/16×1/4 SH. PHILLIPS BIT EX. HARD
  • #2×2-3/4×1/4 SH. PHILLIPS BIT EX. HARD
  • #2×3-1/2×1/4 SH. PHILLIPS BIT EX. HARD
  • 5/64×1-15/16 HX POWER BIT 1/4″ DRIVE
  • 3/32×1-15/16×1/4 SOCKET HEAD POWER BIT
  • 5/32×1-15/16×1/4 SOCKET HEAD POWER BIT
  • 2-3×1-15/16×1/4 SH SLOT .028x.134 BLADE
  • 3-4×1-15/16×1/4 SH SLOT .032x.154 BLADE
  • 4-5×1-15/16×1/4 SH SLOT .034x.187 BLADE
  • 6-7×1-15/16×1/4 SH SLOT .038x.250 BLADE
  • 12-14×2-3/4×1/4 SH. .050x.284 SLOT BIT
  • 1/4x4x1/4 HEX BIT HOLDER MAGNETIC
  • 1/4x6x1/4 HEX BIT HOLDER MAGNETIC
  • 8-10x4x1/4 SH SLOT BIT .042x.275 BLADE
  • #1x3x1/4 SHANK PHILLIPS BIT EX. HARD
  • #2x3x1/4 SHANK PHILLIPS BIT EX. HARD
  • #3x3x1/4 SHANK PHILLIPS BIT EX. HARD
  • #1x1x1/4 SQUARE BIT XH
  • #2 SQUARE BIT 1/4 SHANK EX HARD 1″ LONG
  • #2×1-15/16×1/4 #2 SQ. DRIVE POWER BIT
  • #3×1-15/16×1/4 #3 SQ. DRIVE POWER BIT
  • #1 SQ POWER BIT 1/4 SHANK EX. HARD
  • 1/4×1-5/8×1/4 NUTSETTER NON-MAG.
  • 5/16×1-5/8×1/4 SOC NUTSETTER NON MAG.
  • #30×3/8 SQUARE DR. TRIDENT BIT
  • #2R POWER BIT 1/4 SHANK ACR ISO TEMP
  • 1/4×1-5/8OLx1/4 SOC NUTSETTER MAGNETIC
  • 5/16×1-5/8OLx1/4 SOC NUTSETTER MAGNETIC
  • 1/4×4 MALE SQUARE POWER BIT EXTENSION
  • 1/4×6 MALE SQUARE POWER BIT EXTENSION
  • 3/8 SQUARE DRIVE FOR 5/16 HEX BIT 1 3/8″
  • 1/2 SQUARE DRIVE FOR 5/16 HEX BIT 1-7/16
  • 1/4×2 MALE SQUARE POWER BIT EXTENSION
  • 3/8 SQ. MALEx1/4 HEX SOC ADAPTER
  • T45x5/16×1-1/4 TAMPER RESISTANT
  • 5/32x1x1/4 HEX TAMPER RESISTANT BIT
  • 3/16x1x1/4 HEX SOCKET BIT w/PIN TAMPER
  • PSD2-2x1x1/4 RIBBED TIP PHIL/SQU DRIVE
  • 3/8×1-7/8OLx1/4 SOC NUTSETTER MAGNETIC
  • 3/8×1-7/8×1/4 HEX NUTSETTER NON-MAG
  • M5 ALLEN BIT 1/4 SHANK EX. HARD 1″LONG
  • T15 TORX BIT 1/4 HEX DRIVE EX. HARD
  • T20x1x1/4 TORX BIT EX HARD
  • T25x1x1/4 TORX BIT EX HARD
  • T30x1x1/4 TORX BIT EX HARD
  • T40x1x1/4 TORX BIT EX HARD
  • T30x1-1/4×5/16 TORX PLUS BIT
  • T30 TORX BIT 5/16 SHANK EX HARD 1 1/4″
  • T40 TORX BIT 5/16 SHANK EX HARD 1 1/4″
  • T45 TORX BIT 5/16 SHANK EX HARD 1 1/4
  • T50x5/16×1-1/4 TORX BIT EX-HARD
  • #2Rx2x1/4 SH. REDUCED PHILLIPS BIT
  • 1/4×3 MALE SQUARE POWER BIT EXTENSION
  • 1/4×2-9/16×1/4 HEX NUTSETTER MAGNETIC
  • 5/16×2-9/16×1/4 HEX NUTSETTER MAGNETIC
  • 3/8×2-9/16×1/4 HEX NUTSETTER MAGNETIC
  • 5/16×2-9/16×1/4 HEX NUTSETTER NON-MAG
  • 1/4×1-1/8×3/8 SQ DRIVE BIT HOLDER w/RET.
  • 5/16×1-1/2×3/8 SQ DRIVE BIT HOLDER w/RET
  • 7/16×1-1/4×3/8 SQ DRIVE MAGNETIC SOCKET
  • 4-5×1/4 SLTD BIT W/FINDER .034THx.193W
  • 6-8 SLTD BIT 1/4 HEX DRIVE W/FINDER
  • 8-10 SLTD BIT 1/4 HEX DRIVE W/FINDER
  • 10-12 SLTD BIT 1/4 HEX DRIVE W/FINDER
  • 8-10 SLOT BIT 1/4 SHANK MED HARD 1″ LONG
  • #12 SLOT BIT 1/4 SHANK MED HARD 1″ LONG
  • T15 TORX POWER BIT 1/4 SHANK EX HARD
  • T20x1-15/16×1/4 TORX BIT EX HARD
  • T25 TORX POWER BIT 1/4 SHANK EX HARD
  • T30x1-15/16×1/4 TORX POWER BIT EX. HARD
  • #3×1-15/16×5/16SH. PHILLIPS BIT EX. HARD
  • 3/8×3 MALE SQUARE POWER BIT EXTENSION
  • T55x1-1/4×5/16 TORX BIT EX HARD
  • T20x1x1/4 TORX w/PIN TAMPERPROOF BIT
  • T27 TORX BIT 1/4 SHANK TAMPERPROOF
  • T40 TORX BIT 1/4 SHANK TAMPERPROOF
  • 5/16 NUTSETTER INSERT 1/4 HEX DRIVE
  • 3/8×1-5/32×1/4 INSERT NUTSETTER MAGNETIC
  • T30x1x1/4 FEMALE SQ. DRIVE TORX
  • 9-PIECE TORX FEMALE SQ. DRIVE SET
  • T55 TORX BIT 3/8 FEMALE SQ. DRIVE
  • 4-5x1x1/4 HEX DR. .034x.187 SLOT BIT
  • 5-6x1x1/4 SH SLOT .036x.218 BLADE
  • 8-10 SLOT BIT 1/4 SHANK EX HARD 1″ LONG
  • 10-12 SLOT BIT 1/4 SHANK EX HARD 1″ LONG
  • 12-14 SLOT BIT 1/4 SHANK W/FINDER 3 7/8″
  • 4-5×1/4 SLTD BIT W/FINDER .034THx.193W
  • 6-8×1/4 SLTD BIT W/FINDER .040THx.241W
  • 12-14×1/4 SLOT BIT W/FINDER .050THx.395W
  • 1/4×2-1/8×1/4 HEX BIT HOLDER MAG. w/RR
  • 1/4×2-31/32×1/4 HEX BIT HOLDER MAG w/RR
  • #40×3/8 SQUARE DR. TRIDENT BIT
  • 2-3x1x1/4 SH SLOT .028x.140 BLADE
  • 3-4x1x1/4 SH SLOT .032x.156 BLADE
  • 3-4×1/4×1 MED. HARD SLOT BIT .032x.156
  • 5/16×2-1/8OLx1/4 HEX NUTSETTER MAGNETIC
  • 7/16×2-1/8×1/4 HEX BIT MAGNETIC
  • 7/16 HEX DRIVEx3/8 SQU.DR.x2 w/PIN ADAPT
  • 12-14 SLTD BIT 1/4 SHANK 1″ LONG ISOTEMP
  • HX INST 5/64″, 1/4″, ISOTEMP, 1″ OAL
  • #1 PHIL POWER DRV 1/4 SHANK 1 15/16 LONG
  • #2 PHIL POWER BIT 1/4 SHANK ACR ISO TEMP
  • 6-8×1/4×1 ISO-TEMP SLOTTED BIT .040x.250
  • 8-10×1/4×1 ISO-TEMP SLOTTED BIT.042x.281
  • 10-12×1/4×1 ISO-TEMP SLOT BIT .050x.281
  • #2R PHILLIPS BIT 1/4 SHANK 1″ LONG
  • HEX BIT SOC 3/16″x3/8″ DRIVE 2″ AOL
  • #2x6x1/4 SH. PHILLIPS BIT EX. HARD
  • 3/4×12 TYPE 216 MASONRY DRILL BIT
  • #1×1/4×1 PHIL POWER BIT ISO-TEMP ACR
  • #2x1x1/4 PHILLIPS BIT ISO-TEMP ARC
  • 5/32 HEX KEY 1/4 FEMALE DRIVE
  • 9/16×1-1/2×1/2 SQ DRIVE IMPACT SOCKET
  • #2×1-15/16×1/4 SH. PHILLIPS BIT ISOTEMP
  • T15 TORX BIT 1/4 HEX W/ PINHOLE TAMPROOF
  • T20x1x1/4 TORX BIT w/TAMPROOF PINHOLE
  • T25x1x1/4 TORX BIT w/ PINHOLE TAMPROOF
  • T27 TORX BIT 1/4 HEX W/ PINHOLE TAMPROOF
  • T30x1x1/4 TORX BIT w/ PINHOLE TAMPROOF
  • 3/8×1-1/2×1/2 SQ DRIVE MAGNETIC SOCKET
  • 7/16×1-1/2×1/2 SQ DRIVE MAGNETIC SOCKET
  • 2-3/8 MILTI-SPUR WOOD BIT
  • 5/32 HEX KEY SCREW DRIVER DRILLED ENDS
  • EYE LAG INSTALATION TOOL #1900
  • 1/4x12x1/4 MAG HEX BIT HOLD. w/RING RET.
  • 31 PIECE BIT KIT IN HD PLASTIC CASE
  • 1/4 THR 3/8 NUT DRIVER BIT SET 1/4 DRIVE
  • M12x2-9/16×1/4 SOC NUTSETTER MAGNETIC
  • M8x2-9/16OLx1/4 SOC NUTSETTER MAGNETIC
  • 1/4×1 MALE HEXxSQUARE ADAPTER
  • M10x2-9/16×1/4 SOC NUTSETTER NON-MAG.
  • M8x3″x5/16 12PT. SPLINE BIT
  • #4x1x1/4 SPANNER INSERT BIT FITS #4
  • #6x1x1/4 SPANNER INSERT BIT FITS #6
  • 1/4 HEX DRIVE SPANNER NUT BIT (BIT ONLY)
  • 5/32x1x1/4 HEX INSERT BIT TAMPER-RESIST.
  • T10 TORX SECURITY BIT
  • #12×1/4 SPANNER INSERT BIT FITS #12
  • #14×1/4 SPANNER INSERT BIT
  • T15 TORX SECURITY BIT
  • T20 TORX SECURITY BIT
  • T30 TORX SECURITY BIT
  • 5/16 HEX DRIVE SPANNER NUT BIT (BIT ONLY
  • TORX SECURITY DRIVER KIT 1-MAG. DRIVER
    • UNISTRUT
  • USP100010GR— 1-5/8×1-5/8x10x12ga GREEN NO HOLES
  • USP100020GR 1-5/8×1-5/8x20x12ga GREEN NO HOLES
  • USP1000T20GR 1-5/8×1-5/8x20x12ga GREEN w/ELONG HOLES
  • USP100110G 1-5/8×3-1/4×10 CHANNEL SOLID GREEN
  • USP100120GR 1-5/8×3-1/4x20x12ga GR BACK/BACK SOLID
  • USP1008EG P1008 EG 3/8-16 CHAN NUT w/REG SPR 1-5/8
  • USP1008USS P1008U SS 3/8-16 NUT w/REG SPR 1-5/8
  • USP1026 90′ 2 HOLE ANGLE BRACKET GREEN
  • USP1026HG 90′ 2 HOLE ANGLE BRACKET HD GALV.
  • USP1026SS P1026 SS 90 FITTING 1-5/8 2 HOLE
  • USP1028EG P1028-EG 5 HOLE FLAT PLATE FITTING
  • USP1031EG P1031 EG 4 HOLE FLAT PLATE FITTING
  • USP1031SS P1031 TEE PLATE WITH 4 HOLES SS
  • USP1036EG P1036 EG 3 HOLE FLAT PLATE FITTING
  • USP1043AHG P1043A 6 HOLE BRACKET HD GALV
  • USP1047GR P1047 GR U-SHAPE FITTING FOR 1-5/8
  • USP1047HG 1-5/8×1-5/8 U-BRACKET HD GALV.
  • USP1062EG P1062 EG 5/16 WASHER FLAT FITTING 1-5/8
  • USP1063EG P1063 EG 3/8 WASHER FLAT FITTING 1-5/8
  • USP1064EG P1064 EG 1/2 WASHER FLAT FITTING 1-5/8
  • USP1065EG P1065 EG 2 HOLE FLAT PLATE FITTING
  • USP1066EG P1066 EG 3 HOLE FLAT PLATE FITTING
  • USP1067EG P1067 EG 4 HOLE FLAT PLATE FITTING
  • USP1068EG P1068 EG 90′ FITTING FITTING
  • USP1117 P1117 EG 2 RIGID STEEL CONDUIT CLAMP
  • USP1118EG P1118 EG 2-1/2 STEEL CONDUIT CLAMP
  • USP1280AEG P1280 EG 1-5/8 CAP EG
  • USP1280EG 1-5/8 END CAP E.G. FOR P1000
  • USP1325SS P1325 SS 90′ FITTING 4 HOLE
  • USP1326EG P1326 EG 90′ FITTING FITTING
  • USP1354 4 HOLE ADJUSTABLE HINGE CONNECTOR
  • USP1377GR P1377 GR 4 HOLE BRACKET FOR P1000-P1100-
  • USP1546 1-5/8 2-HOLE 45′ BRACKET EG
  • USP1723188 1-5/8×1-7/8 L-BRACKET SS
  • USP1737GR P1737 GR U-SHAPE FITTING FOR 3-1/4
  • USP1773HG P1773 HG BRACKET 2-1/2 x 12-1/2
  • USP1964EG P1964 EG 5/8 WASHER FLAT FITTING 1-5/8
  • USP2223EG P2223 EG WING SHAPED FITTING 1-5/8
  • USP2223GR P2223 GR WING SHAPED FITTING 1-5/8
  • USP2224EG P2224 EG WING SHAPED FITTING 1-5/8
  • USP2224GR P2224 GR WING SHAPED FITTING 1-5/8
  • USP2226EG P2226 EG WING SHAPED FITTING 1-5/8
  • USP2226GR P2226 GR WING SHAPED FITTING 1-5/8
  • USP2226HG P2226 HG WING SHAPED FITTING 1-5/8
  • USP2227EG P2227 EG WING SHAPED FITTING 1-5/8
  • USP2234AHG P2234A HG 24″ SLOT DOWN BRACKET 1-5/8
  • USP2234ASS 1-5/8×24″ SLOT DOWN BRACKET SS P2234A
  • USP2234HG 1-5/8×24″ SLOT UP BRACKET HD GALV
  • USP2245GR P2245 GR WING SHAPED FITTING 1-5/8
  • USP2328HG P2328 BRACKET HDG
  • USP2345GR P2345 GR WING SHAPED FITTING 1-5/8
  • USP2346GR P2346 GR WING SHAPED FITTING 1-5/8
  • USP2348GR P2348 GR WING SHAPED FITTING 1-5/8
  • USP23791EG 5/16-18×7/8 STUD NUT w/SPRING EG
  • USP23792EG 5/16-18×1-1/8 STUD NUT w/SPRING EG
  • USP23793EG 5/16-18×1-3/8 STUD NUT w/SPRING EG
  • USP2471EG P2471 EG 3/4 WASHER FLAT FITTING 1-5/8
  • USP2495LGR P2495L GR BRACKET 14 x 3-15/16
  • USP2495RGR P2495R GR BRACKET 14 x 3-15/16
  • USP2496LGR P2496L GR BRACKET 16 x 4-7/16
  • USP2496RGR P2496R GR BRACKET 16 x 4-7/16
  • USP2499LGR P2499L GR BRACKET 22 x 5-11/16
  • USP2499RGR P2499R GR BRACKET 22 x 5-15/16
  • USP2501LGR P2501L GR BRACKET 26 x 6-15/16
  • USP2501RGR P2501R GR BRACKET 26 x 6-15/16
  • USP2547HG P2547 HG CABLE TRAY BRACKET 15 x 8-1/4
  • USP2749EG P2749 EG 2 WHEEL TROLLEY 1-1/4
  • USP2750 P2750 4 WHEEL TROLLY
  • USP2751NEG P2751N EG LOOP TROLLEY 4 WHEEL 1-1/4
  • USP2785EG P2785 EG BEAM CLAMP w/U-BOLT & NUTS FOR
  • USP2786EG P2786 EG BEAM CLAMP w/U-BOLT & NUTS FOR
  • USP2787EG P2787 EG BEAM CLAMP w/U-BOLT & NUTS FOR
  • USP286010 P2860-10-VY WHITE PLASTIC END CAP 1-5/8
  • USP286055VY P2860-55-VY WHITE PLASTIC END CAP
  • USP2863EG P2863 EG 1 HOLE FLAT PLATE FITTING 1-5/8
  • USP2945HG 2×3/8×12″ SLOT UP BRACKET HD GALV
  • USP30061420EG P3006 EG 1/4-20 CHANNEL NUT NO SPR 1-5/8
  • USP3007EG P3007 EG 5/16-18 CHAN. NUT NO SPR 1-5/8
  • USP3008EG P3008 EG 3/8-16 CHANNEL NUT NO SPR 1-5/8
  • USP3010EG P3010 EG 1/2-13 CHANNEL NUT NO SPR 1-5/8
  • USP3010SS 1/2-13 CHANNEL NUT NO SPRING SS P3010
  • USP3013EG P3013 EG 1/2-13 CHANNEL NUT NO SPR 1-5/8
  • USP3087EG P3087 EG BEAM CLAMP 1-5/8
  • USP3184P10WH P3184P-WH 10′ PLASTIC CLOSURE STRIP
  • USP3263WC 1-5/8×1-3/8×8′ STRUT CONCRETE INSERT PG
  • USP3345 P3345 ZEE SUPPORT GREEN
  • USP40061024EG P4006 EG 10-24 CHANNEL NUT w/SPR 1-5/8
  • USP4008EG P4008 EG 3/8-16 CHANNEL NUT w/SPR 1-5/8
  • USP4010EG P4010 EG 1/2-13 CHANNEL NUT w/SPR 1-5/8
  • USP4047GR P4047 GR U SHAPE FITTING 13/16
  • USP500020GR 1-5/8×3-1/4x20x12ga GREEN NO HOLES
  • USP5000T20GR 1-5/8×3-1/4x20x12ga GREEN w/ELONG HOLES
  • USP500120GR 1-5/8×6-1/2x20x12ga GREEN NO HOLES BACK/
  • USP5280EG 3-1/4 END CAP E.G. FOR P5000
  • USP550020GR 1-5/8×2-7/16x20x12ga GREEN NO HOLES
  • USP5500T20GR 1-5/8×2-7/16x20x12ga GREEN w/ELONG HOLES
  • USP550120GR 1-5/8×4-7/8x20x12ga GREEN NO HOLES BACK/
  • USP5547GR P5547 GR U SHAPE FITTING 2-7/16
  • USP6001CGR 13/16×1-5/8x16x19ga P6001C GR DBL CHAN
  • USP6001EA 13/16×1-5/8x16x19ga P6001E ALUMINUM
  • USP70710G PVG 10′ RWAY CLOSURE STRIP GALVANIZED

    •  

    Email Us Below or Call (800) 969-8699 / (816) 587-8699

    Our knowledgeable and experienced reps are dedicated to finding you the part you need, quickly, and at the best price available. Convenient payment options along with flexible, same-day shipping, make RH Fastener your best choice for fasteners throughout the entire midwest. Call and experience the difference.

    Contact Us to Get Your Order Started!

    Contact Us
    Sending